Umpol transistor module 1A for multi-switch decoder

Umpol transistor module 1A for multi-switch decoder
19,10 € * 19,90 € * (4,02% saved)

VAT included plus shipping and handling

Immediate dispatch, delivery time is about 1-4 days **

  • 11095
Umpol-transistor module 1A for multi-switch decoder. Module is NOT for operation on a ... More
Product information "Umpol Transistor Module 1A for Multi-Switch-Decoder"
Umpol-transistor module 1A for multi-switch decoder. The module is NOT suitable for operation on a receiver output!

This module is suitable for connection to the robbe / Futaba multi-switch 16 decoder, multi-switch-prop 12 + 2 decoder (item 6453 / 6454) and allows motors up to 1 A current consumption with the function forward stop - to switch backwards.
With little conversion on the plug-in system, the module is also compatible with older multi-switch decoders or with nautic modules from other manufacturers.

Connection
The module is delivered ready for connection. The BEC cable is recommended for connecting the motor.

Important: The transistor module may only be connected to outputs of the decoder for which the memory function has been deactivated (observe the decoder instructions). The maximum current consumption of the connected motor must not exceed the 1 A, as this voltage is supplied by the decoder (6-12V).

feature
After switching on the remote control system, the connected motor can be switched via the switch of the multi-switch module in the transmitter.
Toggle switch forward: Motor is running forward
Toggle switch middle: engine stop
Toggle switch to the rear: Motor runs backwards
If the motor runs in the wrong direction, turn the motor connector to 180 °.

Technical data
Operating voltage 6-12V (via multi-switch decoder)
Switching current max. 1A
Dimensions PCB approx. 11x23 mm
weight 4g
Functions Forward-Stop-Reverse (Use only for connection to a multi-switch decoder)

This switching module is ideal for controlling small electric motors. With a switching capacity of 1A, for example, our Micro Pile geared motors with the functions forward-stop-reverse can be controlled. As encoder on the transmitter, a multi-switch module with matching decoder must be used. Depending on the requirement, a switch or push-button can be used.
Ready to use.

Technical data
Switching current max. 1A
Dimensions PCB approx. 11x23 mm
weight 4g
Functions Forward-Stop-Backward
(Can only be used in conjunction with a multi-switch decoder)

Related links to "Umpol Transistor Module 1A for Multi-Switch Decoder"
Available Downloads:
Read, write and discuss reviews ... More
Customer reviews for "Umpol Transistor Module 1A for Multi-Switch Decoder"
Write a review
Reviews will be released after verification.

Those marked with * are mandatory.

last seen