1 hydraulic pump 12VoltBL / 380 ml / min. Set to 12 bar

419,00 € *

VAT included plus shipping and handling

Delivery time is about 5 days

  • 11838
1 hydraulic pump 12V BL / 380 ml / min. Set to 12 bar. 10-16 bar. Gear pump. Height... More
Product information "1 hydraulic pump 12VoltBL / 380 ml / min. Set at 12 bar"

1 hydraulic pump 12VoltBL / 380 ml / min. Set to 12 bar. 10-16 bar. Gear pump. Height 35mm. Width 35mm. Length 155mm with tank. Incl. Filter. With angled connections.H193ABL12V

Pump and filter (top) are supplied with the connection nipples H066 (article 6785). Nipples have the following data:
Thread: M4
Hose connection: 2,5mm, suitable for hose article 6781
Total length pump / tank / motor: 120mm without connecting flags of the motor.
Thread: M4 with SW7
Hose connection: 2,5mm

Hydraulic pump unit with brushless motor
This pump is our standard pump unit H103A, on which our brushless motor (order no. 0H995) is pre-assembled at the factory. As with all our pump units, a filter unit is included in the scope of delivery.

With the included Bruhsless controller a stepless regulation of the speed during operation is possible.
This allows the max. Set the speed of movement by changing the delivery rate of the pump.

As with the standard pump unit, the operating pressure is preset to approx. 12 bar and can also be increased with the brushless motor to a maximum of approx. 16 bar.

---------------------------------------------------------------------
Due to the high flow velocities with which the oil flows back into the tank and is sucked in again, the oil can foam up.
The tank should therefore be chosen as large as possible.
Please contact us if you need a larger tank.
---------------------------------------------------------------------

Technical data:
Speed: 0 to approx.12.000 rpm
(infinitely adjustable)

Delivery rate: approx. 500ml / min maximum
(depending on the set speed)

Current consumption: up to 6,5A at 7,2V, 16 bar
(depending on the set pressure)

Connections for: pressure, return, venting and filling
Tank capacity: approx. 27 ccm (usable volume)
Pressure: up to max. 16 bar (adjustable)

----------------------------------------------------------------------
DANGER!
If the hydraulic pump is operated continuously or at a higher speed for a longer period of time, there is increased wear on the pump, which is not covered by the statutory warranty!
----------------------------------------------------------------------

----------------------------------------------------------------------
Important note:
The installation position is crucial for our pumps!
Our pumps cannot suck the oil out of an external tank through a hose!
That is why our pumps only work with a flanged tank and in an upright installation position, with the suction hole pointing downwards.
----------------------------------------------------------------------

The model hydraulics may only be operated with hydraulic oil.

Further links to "1 hydraulic pump 12VoltBL / 380 ml / min. Set to 12 bar"
Read, write and discuss reviews ... More
Customer evaluation for "1 hydraulic pump 12VoltBL / 380 ml / min. Set at 12 bar"
Write a review
Reviews will be released after verification.

Those marked with * are mandatory.

Hydrauliköl 250 ml, für Leimbach-System 0H002 Hydraulic oil 250 ml, for Leimbach system 0H002
Contents 0.25 liters (€ 32,00 / 1 liter)
8,00 € * 8,00 € *
1x Zweischalengreifer Bausatz. Greiferbausatz für Ladekran 1x clamshell kit. Gripper kit ...
242,00 € * 242,00 € *
Penz-Ladekran, Bausatz. Unlackiert. Kurzholz-Ladekran, hydra Penz crane, kit. Unpainted ....
3.250,00 € * 3.250,00 € *
last seen