Switching module RC-SM-4 (new 2020). 4 outputs with a maximum of 4A each

1x switching module RC-SM-4 (new 2020). 4 outputs with max. 4A output current to be connected directly to the receiver. Switching current up to 4A each. (10A total current)

The RC circuit module RC-SM-4 has 4 outputs which can be switched via a proportional channel of a remote control RC.

The RC-SM-4 is connected via a power cable directly to an output of the receiver of the remote control. It is also possible the switching module in parallel (eg, with a Y-cable) to connect to an existing servo or speed controller.
4 different loads can be switched on / off independently of one another via the 4 outputs. Many applications are possible in which consumers are to be switched (e.g. lamps, LEDs, small motors, relays, etc.).
The outputs are designed with negative switching.
The module can be operated in 15 different modes. The setting is made with the remote control.

The necessary steps are simply explained in the extensive documentation.
The module is supplied with an approx 30 cm long power cable with Graupner plug.
The connections for the 4 outputs are designed as stranded cables.

Technical data:
Required RC proportional channel: 1
Supply voltage: 4,0 - 8,0V (via RC receiver)
Own current consumption: approx. 10 - 25 mA
Switching outputs: 4 piece
negative switching
Switching voltage: max. 20V DC
Switching current (per output): max 4A
Total current: max. 10A!

Switching variants:

• various touch function
• various switching functions (memory switch)
• Switching of various light effects
• Setting of up to 7 different running speeds
• Zero point of the RC signal: fixed at 1,5 ms
• Switching modes: 15, freely selectable

Dimensions: 20 15 x x 4mm
Weight: 12 gr.