1x KLM 4 / 16 light assistant. The light assistant is the

1x KLM 4/16 light assistant. The light assistant is the core component of any expandable lighting system. Incl. Transmitting diode. Plug & Play solution.

Core component of the lighting system, compatible with all sound modules, speed controllers and the Tamiya MFU-xx. The EasyBus lighting systems are available with different lighting boards, IR Semi lighting etc. expandable.
The PC software is downloadable for free. It no programming skills are required. The controller is adapted to the smallest detail.

Technical data:
-Abmessung 51x36x13 mm
-4 Inputs (steering, throttle, Kanal1, Kanal2)
-2 Servo outputs (power steering, cruise control)
-5 Bus output (for Extension Modules)
-16 Switching outputs, each with max. 500mA, freely configurable
-1x USB socket (micro USB, for configuration)

From April 2018 incl. Transmission diode

Of course, we configure the lighting system like your ideas and save them, too.

The lighting assistant KLM 4 / 16 is the further development of the KLM 4 / 12-500.

Compact design, easy operation and compatibility with the most popular systems on the market are its main strengths.
It is compatible with common forward-reverse speed controls (with or without a separate brake), with the cruise control from Servonaut and all sound modules.
The light functions can be controlled in a variety of ways, for details, please refer to the manual.

The module, which is just 52 x 36 x 13mm, offers eight high-current outputs (500mA each and eight switching outputs with integrated series resistors), four adjustable servo outputs, one infrared output, a USB socket that is only required for configuration and five bus outputs, via which the system can be configured with additional switching -, servo or motor functions can be expanded.

Standard assignment of the outputs:
Output 1 & 2: parking light & main beam & flasher
Output 3 & 4: dipped beam
Output 5: turn signal on the left
Output 6: turn signal on the right
Output 7 & 8: taillight & brake light
Output 9: rear fog lamp
Output 10: reversing light
Output 11 & 12: Speed ​​camera

-It is possible to freely and independently select the behavior of each individual output via PC and to configure it on a percentage basis. In addition to some effect lighting, you can choose from all of the standard lighting functions:

- combined front light (parking light, low beam, high beam, headlight flasher and fog lights)
- combined rear light (parking light, brake light, - American taillight (parking light, brake light, turn signal)
- Daytime running lights with automatic lowering with turn signal operation
- Turning light
- Bend light
- Reversing light
- Turn signals, hazard lights, American turn signals
- Multiblitzer
- Running light
- all-round light
- KnightRider

In addition to the basic behavior of the individual outputs and the brightness, the on and turn-off, as well, on and off can be set at flashing functions.
How easy this is possible can be tested in advance with the demo mode of the free PC software ControlPanel.
The module is connected to four channels of the receiver. In addition to gas and steering, two channels (K1 and K2) are used to control the lighting. The different variants can be found in the manual!
During development special attention was paid to the simplicity of operation.
You do not need any electronic experience for this system! All required information can be found in the included Quick Start Guide!

Delivery:
1x KLM 4 / 16 light assistant
1x IR transmitter diode
4x servo patch cable 10cm