Mechanic parts and accessories for modeling

Topseller
Neodym Magnet, rund, 3mm Durchmesser 2mm dick, hohe Neodymium Magnet, round, diameter 3mm 2mm thick ...
€ 0,27 *
1x Miniatur-Rillenkugellager d5-D10-B4 MR 1x miniature deep groove ball bearings d5-D10-B4 MR
€ 1,38 *
1x Miniatur-Rillenkugellager d4-D09-B4 684-2Z, beidseitig 1x miniature deep groove ball bearings d4-D09-B4 ...
from 1,59 € *
5 Scharniere (vermessingt) 7x12mm, Löcher mit 1,4mm 5 hinges (brass) 7x12mm, holes with ...
€ 2,50 *
Neodym Magnet, rund, 4mm Durchmesser 2mm dick, hohe Neodymium Magnet, round, diameter 4mm 2mm thick ...
€ 0,21 *
5 Scharniere (Messing) 8x4mm nicht auf- geklappt, (14x4mm 5 hinges (brass) 8x4mm not on -...
€ 3,95 * € 4,15 *
Neodym Magnet, rund, 5mm Durchmesser 2mm dick, hohe Neodymium Magnet, round, diameter 5mm 2mm thick ...
€ 0,30 *
Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 from 55
No results were found for the filtering!
NEW
6-Kant-Modellschraube M2,0 x 6 VA/Niro SW 3,0mm Kopfhöhe 1
Hexagon model screw M6 x 2,0 VA / Niro SW ...
6-Kant model screw M2,0 x 6 VA / Niro SW 3,0mm addendum 1,3mm. (Lower head) 25 piece. Matching Sockets Article 2826.
€ 5,89 *
Messing-Nieten (gedreht), 0,8x0,5x3mm. 50 Stück.
Brass rivets (twisted), 0,8x0,5x3mm. 50 pieces.
Brass rivets (turned), 0,8x0,5x3mm. 50 pieces. Head diameter 0,8mm. Shank diameter 0,5mm. Length 3mm. ** DISCONTINUED ITEM!
€ 7,20 *
25 Senkschrauben m.Schlitz M1,6x4 MS DIN 963, Messing.
25 countersunk m.Schlitz M1,6x4 MS DIN 963, ...
25 countersunk m.Schlitz M1,6x4 MS DIN 963, brass.
€ 3,50 *
10 Stück Stehbolzen, Stahl, M2. Gewindebolzen m. Steg. Gesam
10 pieces of studs, steel, M2. Threaded bolt ...
10 pieces of studs, steel, M2. Threaded bolt with bar. Total length 15mm. Lengths: 5,7 / 1,6 / 7,7mm. Bridge width so 1,6mm.
€ 2,39 *
10 Stehbolzen/Gewindestift DIN551 A1 blank,Edelstahl, M2x10
10 stud bolts / grub screw DIN551 A1 ...
10 Stud / Threaded Pin DIN551 A1 bright, stainless steel, M2x10 mm with slot. With slit and cone.
€ 2,34 *
Gewindestift M2 x 8 DIN913, VA, 10 Stück. (Innen-Sechskant).
Set screw M2 x 8 DIN913, VA, 10 piece ....
Grub screw M2 x 8 DIN913, VA, 10 pieces. (Allen). Flat point. Matching 6kant key Article 7172. Stainless steel A2.
€ 1,70 *
Gewindestift M2 x 5 DIN913, VA, 10 Stück. (Innen-Sechskant).
Set screw M2 x 5 DIN913, VA, 10 piece ....
Grub screw M2 x 5 DIN913, VA, 10 pieces. (Allen). Flat point. Matching 6kant key Article 7172. Stainless steel A2.
€ 1,70 *
Gewindestift M2 x 4 DIN913, VA, 10 Stück. (Innen-Sechskant).
Set screw M2 x 4 DIN913, VA, 10 piece ....
Grub screw M2 x 4 DIN913, VA, 10 pieces. (Allen). Flat point. Matching 6kant key Article 7172. Stainless steel A2.
€ 1,70 *
Kugellagersatz für Tamiya-4-Achs- Trucks, wie Arocs 4151
Ball bearing set for Tamiya 4-axle trucks, such as ...
1 ball bearing set for Tamiya 4-axle trucks, such as Arocs 4151 8x4. 34 pieces. Contains the following ball bearings: 26 pieces 11x5x4mm (888) 6 pieces 12x6x4mm (890) 2 pieces 8x5x2,5mm (891) Suitable and recommended for Tamiya 4-axle tractors e.g. ...
€ 43,99 * € 51,99 *
minibal-Gelenkkopf M3,Kugelbohrung 3,0mm Kopf aus Alu, Kopfd
Minibal condyle M3, ball bore 3,0mm head ...
minibal joint head M3, ball bore 3,0mm head made of aluminum, head diameter outside 10mm 26mm long. 1 piece GKA3. Inquire about a quantity price of 10 or more!
€ 7,75 *
6-Kant-Modellschraube M1,0 x 4 Messing SW 1,6mm Kopfhöhe 0
Hexagon model screw M6 x 1,0 brass SW ...
6-Kant model screw M1,0 x 4 brass SW 1,6mm addendum 0,8mm, 50 piece. Matching Sockets: Article 11472.
€ 8,15 *
Neodymium magnet, round, 2mm diameter, 1mm thick, N48
Neodymium Magnet, round, diameter 2mm 1mm thick ...
1x neodymium magnet, round, 2mm diameter, 1mm thick, high holding force, N48, sintered neodymium-iron-boron alloy. Holding force 110 gr.
€ 0,30 *
Neodymium magnet, round, 2mm diameter, 2mm thick, N48
Neodymium Magnet, round, diameter 2mm 2mm thick ...
1x neodymium magnet, round, 2mm diameter, 2mm thick, high holding force, N48, sintered neodymium-iron-boron alloy. Holding force 150 gr.
€ 0,30 *
Neodymium magnet, round, 4mm diameter, 1mm thick, N45
Neodymium Magnet, round, diameter 4mm 1mm thick ...
1x neodymium magnet, round, 4mm diameter, 1mm thick, high holding force, N45, sintered neodymium-iron-boron alloy. Holding force 250 gr.
€ 0,30 *
1 from 55
last seen