Power plant complete set with RS1 for Scania 770 S from Tamiya

509,99 € *

VAT included plus shipping and handling

Immediate dispatch, delivery time is about 1-4 days **

  • 12649
Set consisting of RS1 and circuit boards front, rear, front, roof. Speed ​​controller, lighting system,... More
Product information "Power plant complete set with RS1 for Scania 770 S from Tamiya"

Set consisting of RS1 and circuit boards front, rear, front, roof. Speed ​​controller, lighting system, sound module in one including complete lighting for Scania 770 S from Tamiya.

Robust controller
The speed controller can be permanently loaded with 25A and, thanks to the 32kHz control, is also suitable for coreless motors. It offers manual transmission support for up to four gears, a clutch function, handbrake, optional inertia simulation and a cruise control function, which doesn't work like the competition (stick deflection controls acceleration), but like the original: the throttle stick deflection controls the speed and the cruise control is activated at the push of a button . Pressing the button again or braking deactivates the cruise control.

Exceptional sound
When it comes to programmability, KraftwerK is once again setting standards. While the competition can only use a few sound snippets for the engine sound, KraftwerK can use any number and it works as follows:

First, the speed range is defined, eg 500 rpm immediately after the start and 2300 rpm when the engine revs out. Then sound snippets are stored for any number of areas and defined with basic speed, minimum and maximum. At minimum, the sound is speed-adjusted, at "basic speed" it is played at full volume and speed-related 1:1 and up to maximum it is speed-adjusted again and finally faded out. The snippets can and should of course overlap and this can create an ultra-realistic sound image. There are three audio tracks in total: 2x acceleration and 1x delay. The first audio track is the normal driving sound, the second audio track can either be mixed or switched proportionally as a load. The third sound track is the delay sound and is automatically mixed in when the stick is released.

If that is too complicated for you, you will be happy about the fact that 3 high-quality sounds are already supplied with the module. In the future there will also be a sound library with premium sounds that can be purchased for a few euros and downloaded using the control panel and saved on your own module.

Unlimited expandability
The leading role of KraftwerK in the field of RC bus systems now comes into its own with the RS1. The RS6 can be expanded as required via the 1 EasyBus outputs. Lighting boards, switch extensions, servo controls and much more can be controlled via the EasyBus. However, the RS1 still has a special gimmick: on the upper side, four individual sockets are barely visible, through which another module can be plugged in. The first module in this series is the BL8A, an 8A brushless controller intended for hydraulic pumps.
Versatile connections / technical data

  • Battery (6 - 20V)
  • Motor 25A, up to 32kHz, brush and coreless motor
  • 5 servo inputs or SUMD, IBUS, SBUS, CPPM
  • 5 servo outputs
  • 6 bus outputs
  • 8 switching outputs 500mA
  • 2 switching outputs 10A
  • Infrared transmitter (diode included)
  • Loudspeakers
  • Dimensions 63x44x28mm



Traction controller properties

  • Operating voltage 6-20V
  • BEC 6V/3A
  • Clock frequency adjustable up to 32kHZ
  • clutch function
  • handbrake function
  • Manual transmission support
  • adjustable inertia simulation
  • adjustable cruise control
  • Protection functions: battery undervoltage, motor short circuit, overtemp
  • Functions for servo outputs
    • proportional function
    • Proportional function Direct
    • Prop function switched
    • Two positions
    • Three positions
    • skamler
    • trailer supports engine
    • Dump/tipper motor
    • Ramp/Platform engine
    • Manual transmission



Properties sound

  • unlimited number of sounds
  • 10-15 simultaneously playable sounds
  • Playback Modes: Touch, Loop, Once, Continuous, Random, Breakpoints
  • Formats: WAV, MP3
  • Usable sample rate: All (automatic conversion to 44.100)
  • Volume control: potentiometer, via channel, via software
  • SD card: max. 32 GB



Properties lighting system

  • Controls: light and sound control pad, user-defined channels, multiswitch
  • Features
  • hazard lights
  • left blinker
  • right blinker
  • Blinker running effect
  • Sidelights
  • Marker light
  • parking light and low beam
  • parking light and high beam
  • Parking, dipped and main beam
  • Parking lights and turn signals
  • Clearance lights and turn signals
  • dimmed headlights
  • low beam and high beam
  • Highbeam
  • Fog Lights
  • Combined front light
  • daytime running lights
  • Taillight
  • Stoplight
  • rear light, brake light
  • Tail light, brake light and turn signals
  • Tail light, rear fog light
  • in Nebelschlussleuch
  • Combined rear light
  • Reversing light
  • Cornering light / cornering light
  • Adaptive cornering light
  • single switch
  • Double switch
  • Rotating light on/off
  • Stroboscope
  • chaser
  • Knight Rider
  • Aqua effect
  • Flash
  • Proportional dimmer
Related links to "Power plant complete set with RS1 for Scania 770 S from Tamiya"
Read, write and discuss reviews ... More
Customer evaluation for "Power plant complete set with RS1 for Scania 770 S from Tamiya"
Write a review
Reviews will be released after verification.

Those marked with * are mandatory.

TIP!
1x Carson Goldhofer-Sattelauflieger im Tamiya-Maßstab 1x Carson Goldhofer trailer in ...
479,00 € * 584,99 € *
TIP!
1 Carson Hinterkipp-Sattelauflieger FLIEGL.Tamiya-Maßstab 1 Carson End Dump semi-trailer ...
1.028,99 € * 1.239,97 € *
TIP!
1x Carson Goldhofer-Sattelauflieger im Tamiya-Maßstab 1x Carson Goldhofer trailer in ...
479,00 € * 584,99 € *
last seen