1x 2 channel switch (2x 10A) / 2 relay. 2 consumers could

1x 2 channel switch (2x 10A) / 2 relay. 2 consumers can be switched on / off separately with the 1 RC channel. Switching capacity per output max. each 10A / max.40V.

eg for lighting, headlight, fog horn, etc.
Works with a free proportional channel, or
a 3-position switch on the transmitter.

The 2-channel switch is particularly suitable for complex
Lighting with LEDs or bulbs since 2
different functions with only one channel independently
can be switched from each other.
The RC-transmitter must not be changed.

Features:
2x separate SWITCH function with only one RC channel
Addable memory function per function can be switched on via DIP.
Parallel operation of the servo possible
negligible Current consumption
possible switching capacity per switch 10A / 0-40 Volt
2 relay stages with changeover contacts
screw
LED function control
Operating voltage: 4,8-6V
Dimensions 40mm x 34mm x 21mm
Weight 40gr. with servo cable

Service:In the following example, the module is connected to a channel
connected vertical stick.
Channel 1: steer joystick up and hold
Channel 1 is switched on. (Pushbutton function)
Channel 2: steer joystick down and hold
Channel 2 is switched on. (Pushbutton function)
To turn off the respective channel bring the stick inNeutralstellung.When the MEMORY function is switched on, the channel remains switched on until the joystick is again set to its own position.

There is a practical holder for this module: Article 11956.