Nautic MultiSwitch channel expansion Robbe / Futaba

1x Nautic Multiswitch channel extension 8 additional switches (16 functions) For Robbe / Futaba transmitters, a free proportional channel is required on the transmitter and sound module

At a glance:
Extension of the transmitter with additional switches 8
Control of other functions 16
-evaluation Of the switch by sound module USM-RC, USM-RC-2 or Multiswitch decoder MSD 16
Port requires free proportional channel
Paving available inside or outside the transmitter housing possible housing for external mounting
-Wichtig: Not compatible with each transmitter / broadcast system

Description:
The Nautic multiswitch module NMS is a channel extension for RC transmitter with 16 switching functions.
The switch module is installed in the transmitter and transmits on a channel, the states of switches 8.

If there is insufficient space for the installation in the transmitter housing is available, the modules can be attached to the multi-switch housings outside the transmitter housing.
The switches can be used to control the various functions (e.g. starting sounds or switching outputs) of the USM-RC and USM-RC-2 sound modules. The output of the receiver is connected directly to the proportional input (X2 / 3 or X2 / 4) of the sound module, so no additional multiswitch decoder is required.
Optionally, it is also possible to use the modules NMS-16-G and NMS-16-R to switch the outputs of the multiswitch decoder MSD-16, if the evaluation of the switches is to take place independently of the sound module.
Each of the switches on the NMS has 3 positions: up - middle - bottom. The middle position is the "Off" switch per -Stellung.Somit can 2 functions ( "Up" and "Down") are controlled.
The switches have all a "key function", ie, you automatically go back again and again to the center position.
With the programmable memory function in the Sound-Teacher, the push button function can also be used to switch permanently switching outputs for lights, for example.
The transfer of the switch states is based on the time division multiplexing, thereby prolonging the reaction time of the switch by about 0,2-0,3s.
Specifications: NMS 16-R

-Abmessung The motherboard: 66 32 mm x
-Benötigte Height in the remote control (without switch lever): 26 mm
-Schalterabstand: Horizontal 15 mm, vertically 15 mm