Nautic MultiSwitch channel expansion Graupner

Nautic MultiSwitch channel expansion Graupner
This item is currently not available!
85,95 € *

VAT included plus shipping and handling

Delivery time Dec22 days**

  • 9824
1x Nautic Multiswitch channel extension 8 additional switches (16 functions) For Graupner ... More
Product information "Nautic MultiSwitch channel expansion Graupner"

1x Nautic Multiswitch channel extension 8 additional switches (16 functions) For Graupner transmitters, a free proportional channel is required on the transmitter and sound module

At a glance:
Extension of the transmitter with additional switches 8
Control of other functions 16
-evaluation Of the switch by sound module USM-RC, USM-RC-2 or multiswitch decoder MSD 16
Port requires free proportional channel
Paving available inside or outside the transmitter housing possible housing for external mounting
-Wichtig: Not compatible with each transmitter / broadcast system

Description:
The Nautic multiswitch module NMS is a channel extension fürRC transmitter with 16 switching functions.
The switch module is installed in the transmitter and überträgtauf a channel - depending on the version - the states of 812 switches.

If in the transmitter housing is not enough space for the installation of presence, the modules can be attached to the multi-switch housing Except half of the transmitter housing.
The switches can be used to control the various functions (e.g. starting sounds or switching outputs) of the USM-RC and USM-RC-2 sound modules. The output of the receiver is connected directly to the proportional input (X2 / 3 or X2 / 4) of the sound module, so no additional multiswitch decoder is required.
Optionally, it is also possible to use the modules NMS-16-G and NMS-16-R to switch the outputs of the multiswitch decoder MSD-16, if the evaluation of the switches is to take place independently of the sound module.
Each of the switches on the NMS has 3 positions: up - middle - bottom. The middle position is the "Off" switch per -Stellung.Somit can 2 functions ( "Up" and "Down") are controlled.
The switches all have a "key function", that is, you always go back automatically to the center position.
With the programmable memory function in the Sound-Teacher, the push button function can also be used to switch permanently switching outputs for e.g. lights.
The transfer of the switch states is carried out according demZeitmultiplexverfahren, whereby the reaction time dersch old extended by about 0,2-0,3s.

Specifications: NMS 16-G
The NMS-16-G (with 8 switch) can be built in transmitter Graupner.
-Abmessung The motherboard: 66 47 mm x
-Benötigte Height in the remote control (without switch lever): 26 mm
-Schalterabstand: Horizontal 12 mm, vertically 15 mm

Links to "Nautic MultiSwitch channel expansion Graupner"
Available Downloads:
Read, write and discuss reviews ... More
Customer reviews for "Nautic MultiSwitch channel expansion Graupner"
Write a review
Reviews will be released after verification.

Those marked with * are mandatory.

Multiswitch Decoder MSD-16 Multiswitch decoder MSD 16
89,95 € * 89,94 € *
last seen