Nautic MultiSwitch channel expansion Graupner

1x Nautic Multiswitch channel extension 12 additional switches (24 functions) For Graupner transmitters, a free proportional channel is required on the transmitter and sound module

At a glance:
Extension of the transmitter with additional switches 12
Control of other functions 24
-evaluation Of the switch by sound module USM-RC, USM-RC-2 or multiswitch decoder MSD 16
Port requires free proportional channel
Paving available inside or outside the transmitter housing possible housing for external mounting
-Wichtig: Not compatible with each transmitter / broadcast system

Description:
The Nautic multiswitch module NMS is a channel extension fürRC transmitter with 24 switching functions.
The switch module is installed in the transmitter and a channel überträgtauf the states von12 switches.

If in the transmitter housing is not enough space for the installation of presence, the modules can be attached to the multi-switch housing Except half of the transmitter housing.
The switches can be used to control the various functions (e.g. starting sounds or switching outputs) of the USM-RC and USM-RC-2 sound modules. The output of the receiver is connected directly to the proportional input (X2 / 3 or X2 / 4) of the sound module, so no additional multiswitch decoder is required.
Each of the switches on the NMS has 3 positions: up - middle - bottom. The middle position is the "off" position.
Thus can be controlled per switch 2 functions ( "Up" and "Down").
The switches all have a "key function", that is, you always go back automatically to the center position.
With the programmable memory function in the Sound-Teacher, the push button function can also be used to switch permanently switching outputs for e.g. lights.
The transfer of the switch states is carried out according demZeitmultiplexverfahren, whereby the reaction time dersch old extended by about 0,2-0,3s.

Specifications: NMS 24-G
The NMS-24-G (with 12 switch) in Graupner transmitter Built werden.Achtung: The NMS 24-G does not work with dem2,4GHz system HoTT! Here, then, the NMS-16-G must be used.
-Abmessung The motherboard: 66 47 mm x
-Benötigte Height in the remote control (without switch lever): 26 mm
-Schalterabstand: Horizontal 12 mm, vertically 15 mm