Black Week 2024 is underway! Look forward to great offers!

Go to home page
€ 0,00 *
Filter
1 untreated DB Euro pallet scale 1: 14,5. Fits
1 untreated DB Euro pallet scale 1: 14,5. Fits
1 untreated DB Euro pallet in a scale of 1:14,5. Matching the Wedico scale. Handcrafted from untreated pinewood. With original DB and EURO branding stamps. 83x55x10mm. This pallet is sawn all around and not sanded - like the original. Dimensions: 82 x 55 x 10 mm. We only have this item in stock in small quantities! The delivery time would therefore be around 3 weeks!

Available immediately, delivery time: 1-4 days

Product number: 7662

Ab € 2,00 *
Details
1 set brick perforated brick, red, 24 pieces. Each approx. 31x15x12mm
1 set brick perforated brick, red, 24 pieces. Each approx. 31x15x12mm
1 set of brick perforated bricks, red, 24 pieces. Each approx. 31x15x12mm. (Net weight approx. 185g/pack)

Available immediately, delivery time: 1-4 days

Product number: 8784

€ 3,84 *
Metal hook about 9mm high 1 piece (5350 / 00)
Metal hook about 9mm high 1 piece (5350 / 00)
Metal hook about 9mm high 1 piece (5350 / 00).

Available immediately, delivery time: 1-4 days

Product number: 5158

€ 0,92 *
Turnbuckle M2 (aluminum), with opposite thread. Overall length
Turnbuckle M2 (aluminum), with opposite thread. Overall length
Turnbuckle M2 (aluminum), with opposing thread. Total length 19 - 30mm. (Center eye) 1 piece. Eyelet diameter: inside 1,7mm, outside 4mm. Base body diameter: 4mm.

Available immediately, delivery time: 1-4 days

Product number: 11850

€ 1,99 *
1 delineators with footboard. Made by hand and
1 delineators with footboard. Made by hand and
1 guide post with base. Hand-made and painted. The paint is waterproof and therefore suitable for outdoor use. Height: 82mm. Suitable for Wedico and Tamiya scale. The base is weighted with a metal plate and is therefore stable. Special designs (e.g. with plug-in base or spring-loaded base) are possible, but have a delivery time of approx. 4-6 weeks, as these items are only produced when required.

Available immediately, delivery time: 1-4 days

Product number: 8056

Ab € 1,40 *
Details
1 delineators with mounting foot. Made by hand
1 delineators with mounting foot. Made by hand
1 guide post with plug-in base. Hand-made and painted. The paint is waterproof and therefore also suitable for outdoor use. Post height: 77mm. Suitable for Wedico and Tamiya scale. The base is provided with a metal or wooden pin. This means that the post can be inserted into the ground or a roadway. Special designs (e.g. with a base or spring-loaded base) are possible, but have a delivery time of approx. 4-6 weeks, as these items are only produced when required.

Available immediately, delivery time: 1-4 days

Product number: 9736

Ab € 0,99 *
Details
1 untreated EPAL Euro pallet in scale. 1:16
1 untreated EPAL Euro pallet in scale. 1:16
1 untreated EPAL Euro pallet in scale 1:16. Matching the robbe scale. Untreated pine wood, handcrafted. With original EPAL and EURO branding stamps. 74x50x9,5mm. The pallet is sawn all around and not sanded - like the original!Dimensions:74 x 50 x 9,5mmWe only have this item in stock in small quantities! The delivery time can therefore be around 1 week!Quantity tiered prices:from 51 pieces: 1,60 euros/piecefrom 101 pieces: 1,53 euros/piece

Available immediately, delivery time: 1-4 days

Product number: 9514

Ab € 2,00 *
Details
1 aged DB Euro pallet scale 1: 14,5. Suitable for
1 aged DB Euro pallet scale 1: 14,5. Suitable for
1 aged DB Euro pallet in a scale of 1:14,5. Matching the Wedico scale. Handcrafted from untreated pinewood. With original DB and EURO branding stamps. 83x55x10mm. The pallet has been artificially aged! The pallet is sawn all around and not sanded - like the original! Dimensions: 83 x 55 x 10 mm We only have this item in stock in small quantities! The delivery time can therefore be around 3 weeks!

Available immediately, delivery time: 1-4 days

Product number: 7663

Ab € 2,00 *
Details
1 aged EPAL Euro pallet on a scale of 1: 14,5. Appropriate
1 aged EPAL Euro pallet on a scale of 1: 14,5. Appropriate
1 aged EPAL Euro pallet in a scale of 1:14,5. Matching the Wedico scale. Handcrafted from untreated pinewood. With original EPAL and EURO branding stamps. 83 x 55 x 10mm. The pallet has been artificially aged! The pallet is sawn all around and not sanded - like the original! Dimensions: 83 x 55 x 10 mm We only have this item in stock in small quantities! The delivery time can therefore be around 3 weeks!

Available immediately, delivery time: 1-4 days

Product number: 7665

Ab € 2,00 *
Details
Turnbuckle M3 (aluminum), with opposite thread. Overall length
Turnbuckle M3 (aluminum), with opposite thread. Overall length
Turnbuckle M3 (aluminum), with opposing thread. Total length 45 - 74mm. (Center eye) 1 piece. Eyelet diameter: inside 1,7mm, outside 5mm. Base body diameter: 5,5mm.

Available immediately, delivery time: 1-4 days

Product number: 11851

€ 2,09 *
1 new/untreated SBB Euro pallet on a scale of 1:10. with licensed
1 new/untreated SBB Euro pallet on a scale of 1:10. with licensed
1 new/untreated SBB Euro pallet in 1:10 scale. With licensed logos. Handcrafted from untreated pinewood. With original SBB and EURO branding stamps. SBB Euro pallet. The pallet is sawn all around and not sanded - like the original! With burned-in logo of the SBB (Swiss Federal Railways) and EUR. The logos are licensed and subject to trademark protection. Dimensions: 120 x 80 x 15mm We only have this item in stock in small quantities! The delivery time can therefore be around 3 weeks!

Available immediately, delivery time: 1-4 days

Product number: 11451

€ 2,90 *
new / unbeh.SBB euro pallet in the scale 1: 14,5. Tamiya size
new / unbeh.SBB euro pallet in the scale 1: 14,5. Tamiya size
1 new/untreated SBB Euro pallet in 1:14,5 scale. Matching the Tamiya scale. Handcrafted from untreated pinewood. With original SBB and EURO branding stamps. SBB Euro pallet. The pallet is sawn all around and not sanded - like the original! With burned-in logo of the SBB (Swiss Federal Railways) and EUR. The logos are licensed and subject to trademark protection. Dimensions: 83 x 55 x 10 mm We only have this item in stock in small quantities! The delivery time can therefore be around 3 weeks!

Available immediately, delivery time: 1-4 days

Product number: 11450

Ab € 1,95 *
Details
1 untreated DB Euro pallet scale 1: 16. Suitable for
1 untreated DB Euro pallet scale 1: 16. Suitable for
1 untreated DB Euro pallet in 1:16 scale. Matching the robbe scale. Handcrafted from untreated pinewood. With original DB and EURO branding stamps. 74x50x9,5mm. DB Euro pallet. The pallet is sawn all around and not sanded - like the original! Dimensions: 74 x 50 x 9,5 mm We only have this item in stock in small quantities! The delivery time can therefore be around 3 weeks! Quantity discounts: from 51 pieces: 1,90 euros/piece

No longer available

Product number: 9512

Ab € 1,99 *
Details
Lashing strap (textile) about 3mm wide 50cm long, orange, for
Lashing strap (textile) about 3mm wide 50cm long, orange, for
Lashing strap (textile) approx. 3mm wide, 50cm long, orange, ideal for securing cargo.

Available immediately, delivery time: 1-4 days

Product number: 4199

Content: 0.5 Running meter (s) (1,20 €* / 1 running meter)

€ 0,60 *
1 formwork boards, of wood, 2-varnished, for the
1 formwork boards, of wood, 2-varnished, for the
1 formwork boards, of wood, 2-varnished, for Wedico scale. Dimensions: LxWxH 310x6x15mm. Weight approx 14gr.

Available immediately, delivery time: 1-4 days

Product number: 7750

Ab € 1,09 *
Details
%
1 new / unbeh.EPAL-euro range in scale 1: 14,5. Fits
1 new / unbeh.EPAL-euro range in scale 1: 14,5. Fits
1 new/untreated EPAL Euro pallet in 1:14,5 scale. Matching the Wedico scale. Handcrafted from untreated pinewood. With original EPAL and EURO branding stamps. 83x55x10mm. EPAL Euro pallet. The pallet is sawn all around and not sanded - like the original! Dimensions: 83 x 55 x 10 mm We only have this item in stock in small quantities! The delivery time can therefore be around 3 weeks!

Available immediately, delivery time: 1-4 days

Product number: 7664

€ 5,59 * € 5,99 * (6.68% saved)
Spannschloss Messing, 2 piece, with right and left-hand thread
Spannschloss Messing, 2 piece, with right and left-hand thread
Brass turnbuckle, 2 pieces, with right-hand and left-hand thread. M3x24. Length 32-53mm. Diameter 4,0mm. Length of middle section 24mm with cross hole for toggle. Dimensions of the eyebolts:Outer diameter: 4,5mmInner hole: 2,9mmEyelet thickness: 2,8mmThread: M3 (1x left, 1x right)Middle section:Cross hole: 2mmShackles shown in the product photos are NOT included in the scope of delivery! This is only an example of use.

Available immediately, delivery time: 1-4 days

Product number: 7148

€ 5,64 *
Ratcheting buckle made of metal, etched approximately 16x5x4mm for
Ratcheting buckle made of metal, etched approximately 16x5x4mm for
Metal tension belt lock, etched approx. 16x5x4mm for scale 1:14,5 - 1:16 4 pieces KIT with 3x strap 50cm and 8 hooks. With assembly instructions. Belt tensioner. Kit for building 4 belt tensioners (without ratchet function). The pre-etched bending lines make assembly very easy. The parts of the belt tensioner can be soldered or glued with superglue. The parts can be easily separated from the etched frame with scissors or a carpet knife. This is quite easy due to the low material thickness of 0,2 mm. The ready-made belt tensioners significantly improve the prototypical lashing of cargo or building materials. Additional belt straps are available under the article numbers: 4199, 9145, 4200, 4201, 4202, 4203, 4204, 4205.

Available immediately, delivery time: 1-4 days

Product number: 3667

€ 8,50 *
Lashing strap (textile) about 3mm wide 50cm long, black, to
Lashing strap (textile) about 3mm wide 50cm long, black, to
Lashing strap (textile) about 3mm wide 50cm long, black, for fixing cargo goods suited.

Available immediately, delivery time: 1-4 days

Product number: 4204

Content: 0.5 Running meter (s) (1,20 €* / 1 running meter)

€ 0,60 *
FineLine single bottle 1:16, 15mm high, yellow
FineLine single bottle 1:16, 15mm high, yellow
Single bottle 1:16, 15mm high, yellow

Available immediately, delivery time: 1-4 days

Product number: 1685

Ab € 0,29 *
Details
1 pair D-rings with mounting material, brass investment casting
1 pair D-rings with mounting material, brass investment casting
1 pair of D-rings with fastening material, precision cast brass. 1-sided tab. Can be used as a lashing or towing eyelet. Brass, UNTREATED. Suitable for M1:16 - 1:14. Scope of delivery: 2x D-ring (made of precision cast brass), approx. 12x12mm. 2x fastening tab (made of precision cast brass), one-sided. Approx. 8x12mm. 4x hexagon screw VA M1,6x8mm (3531), 4x nut M1,6 (stainless steel) (2576) The hooks with the article numbers: 8179, 7239, 8282, 8398 fit this article.

Available immediately, delivery time: 1-4 days

Product number: 9175

€ 6,95 *
1x brass hook total length approx 14mm with eyelet (2mm
1x brass hook total length approx 14mm with eyelet (2mm

Available immediately, delivery time: 1-4 days

Product number: 8153

€ 3,80 *
Turnbuckle brass, 2 piece, with right and left thread
Turnbuckle brass, 2 piece, with right and left thread
Brass turnbuckle, 2 pieces, with right and left thread. M2x14. Length 22-32mm. Diameter 3,0mm. Length of middle section 14mm with cross hole for toggle. Image 2 shows an application example of a tension chain consisting of the following items:Chain item 3767Shackle item 7190Turnbuckle item 7145This combination is perfectly suitable for use in scales 1:16 - 1:13,5.Additional photos may already show the successor item. Dimensions of the eyebolts:Outer diameter: 3,5mmInner hole: 2mmEyelet thickness: 1,8mmThread: M2 (1x left, 1x right)Middle section:Length: 14mmCross hole: 1,6mm

No longer available

Product number: 7145

€ 4,50 *
Details
Shackle approx. 8,6x5,6mm, with threaded stud M1. Brass
Shackle approx. 8,6x5,6mm, with threaded stud M1. Brass
1 shackle approx. 8,6x5,6mm, with threaded bolt M1. Brass. 1 piece! Inner dimensions: 2,8x5mm. Thread: M1Shackle thickness: 1mm

Available immediately, delivery time: 1-4 days

Product number: 11269

€ 4,20 *
Turnbuckle M3 (aluminium) with opposite thread
Turnbuckle M3 (aluminium) with opposite thread
Turnbuckle M3 (aluminium) with counter-rotating thread. Total length 49 - 74mm. 1 piece. Eyelet diameter: inside 4,1mm, outside 9,4mm. SOLD OUT! This article is no longer available. Successor article (unfortunately not with identical technical data: Article 11851  

Available immediately, delivery time: 1-4 days

Product number: 5144

€ 1,90 *
Lashing strap (textile) about 6mm wide 50cm long, orange, for
Lashing strap (textile) about 6mm wide 50cm long, orange, for
Lashing strap (textile) approx. 6mm wide, 50cm long, orange, ideal for securing cargo.

Available immediately, delivery time: 1-4 days

Product number: 8411

Content: 0.5 Running meter (s) (1,20 €* / 1 running meter)

Ab € 0,60 *
Details
Turnbuckle M2 (MS), with opposing threads
Turnbuckle M2 (MS), with opposing threads
Turnbuckle M2 (MS), with opposing thread. Total length 39 - 56mm. 1 piece. Eyelet diameter: inside 4mm, outside 7,3mm. Made of brass, shiny nickel-plated. This article is available again. Successor article (unfortunately not with identical technical data:) Article 11850

Available immediately, delivery time: 1-4 days

Product number: 1866

€ 1,84 *
Lashing Set of 4 small double hooks, MS-precision casting, lashing strap
Lashing Set of 4 small double hooks, MS-precision casting, lashing strap
1 lashing set consisting of 4 small double hooks, MS precision casting, lashing strap and tension handles, approx. 6x9mm. Small design. The hooks can withstand moderate tensile forces. Suitable for Tamiya and Wedico scale. For the production of realistic lashings. Scope of delivery: 4x small double hooks approx. 7x6x4mm, sanded ready for use 2 meters of lashing strap, orange, approx. 3mm wide (item 9145) 2x tension handles approx. 9x6mm Hooks and tension handles are made of brass precision casting.

Available immediately, delivery time: 1-4 days

Product number: 9982

€ 9,95 *
FineLine single bottle 1:16, 15mm high, red
FineLine single bottle 1:16, 15mm high, red
Single bottle 1:16, 15mm high, red

Available immediately, delivery time: 1-4 days

Product number: 4246

Ab € 0,29 *
Details
1 brass hook total length approx. 16mm with eyelet (2,5mm
1 brass hook total length approx. 16mm with eyelet (2,5mm
1 brass hook, total length approx. 16mm with eyelet (2,5mm diameter), 1 piece. Made of metal (precision cast brass). BLACK. The hook is highly resilient.

Available immediately, delivery time: 1-4 days

Product number: 8179

€ 4,50 *
Turnbuckle brass, 2 piece, with right and left thread
Turnbuckle brass, 2 piece, with right and left thread
Turnbuckle brass, 2 piece, with right and left thread. M2x18. Length 26-40mm. Diameter 3,0mm. Length middle part 18mm m. Cross hole for toggle.

Available immediately, delivery time: 1-4 days

Product number: 7147

€ 4,93 *
1 element of a concrete protective wall. Fits the Wedico scale
1 element of a concrete protective wall. Fits the Wedico scale
1 element of a concrete protective wall. Matches the Wedico scale. Made of hardwood, coated with concrete-like textured paint. Approx. 240 x 42 x 56 mm. The individual elements can be connected to one another. Item 7731 is suitable as the start and end piece. The recesses in the foot area can also be used for moving with the forks of a forklift truck.

Available immediately, delivery time: 1-4 days

Product number: 7732

Ab € 5,80 *
Details
1 D-ring with fixing material, brass fine-casting. 1-seiti
1 D-ring with fixing material, brass fine-casting. 1-seiti
1 D-ring with fastening material, precision cast brass. 1-sided tab. Can be used as a lashing or towing eyelet. Brass, BLACK. Ready to use. Suitable for Tamiya/Wedico size. Scope of delivery: 1x D-ring (made of precision cast brass), approx. 8x8mm. 1x fastening tab (made of precision cast brass), one-sided. Approx. 4,8x7mm. Blackened brass castings. 1x hexagon screw MS M1,4x8mm, 1x nut M1,4 (brass). The hooks with the article numbers 8154, 8179, 7239, 8282, 8398, 9345, 9346 fit this article. The D-ring with holder can bear loads according to their size. Ideal for use as a lashing point.

Available immediately, delivery time: 1-4 days

Product number: 11454

€ 4,99 *