Material for modellers

1x neodymium magnet, round, 3mm diameter, 2mm thick, high holding force, N35, sintered neodymium-iron-boron alloy. Nickel-plated. Holding force 250g. Weight: 0,11g.

1 resistor, axial leaded, 220 Ohm 0,25W, carbon layer 5% red-red-brown.

1 resistor, axial leaded, 330 Ohm 0,25W, carbon layer 5% orange-orange-brown.

1 resistor, axial leaded, 470 Ohm 0,25W, carbon layer 5% yellow-purple-brown.

Spring steel wire 1,5mm diameter, 1m long in straightened rods, polished DIN 17223. Individual weight: 13g.

Spring steel wire 0,5mm diameter, 1m long in straightened rods, polished DIN 17223

1x miniature deep groove ball bearing d5-D10-B4 MR 105-2Z, metal sealing discs on both sides, inside: 5mm, outside: 10mm, width: 4mm.

Spring steel wire 0,3mm diam., 1m long in straightened rods, polished DIN 17223

Round brass 1,0mm, 1m long, MS machining Quality

Round brass 0,5mm, 1m long, MS machining Quality

Round brass 1,5mm, 1m long, MS machining Quality

1x neodymium magnet, round, 4mm diameter, 2mm thick, high holding power, N45 nickel, sintered neodymium-iron-boron alloy. Holds approx. 450g.

1x miniature deep groove ball bearings d4-D09-B4 684-2Z, both sides metal sealing washers. Inside: 4mm, outside: 9mm, width 4mm.

Spring steel wire 1,0mm diameter, 1m long in straightened rods, polished DIN 17223

5 hinges (brass-plated) 7x12mm, holes with 1,4mm diameter. Scope of delivery: 5 pieces (7809/02). Mounting holes: 1,4mm diameterWe recommend brass screws with 1,2mm for assembly:Length 6mm: Article 8868Length 8mm: Article 3145/7522/7523Length 10mm: Article 7525Length 12mm: Article 7524Nuts to match these screws: Article 8338Matching socket wrench for these hexagon screws: Article 6 Screws and socket wrench are not included.

1x miniature deep groove ball bearing d5-D11-B4 MR 115-2Z, metal sealing discs on both sides. Inside: 5mm, outside: 11mm, width: 4mm. This bearing replaces the component "MA3" (metal bearing) from many Tamiya kits. It has identical dimensions (11x5x4mm) to the part MA3. The part BM1 can also be fully replaced.

Round brass 2,0mm, 1m long, MS machining Quality

1x neodymium magnet, round, 3mm diameter, 1mm thick, high holding force, N45, sintered neodymium-iron-boron alloy. Holding force 200 gr. Max. operating temperature 80°C.

1 aluminum checker plate plate double rice grain, dim. 300x200mm, embossed, aluminum, for scale 1:16 - 1:14,5. Material thickness 0,5mm (with embossing DUET approx. 0,8mm). The ribbed embossing is identical for items 5045, 3294, 7345, 8812 and 8813. Only the material or material thickness is different! This item is always in stock (standard size)!

Spring steel wire 0,4mm diam., 1m long in straightened rods, polished DIN 17223

1x neodymium magnet, round, 2mm diameter, 1mm thick, high holding force, N48, sintered neodymium-iron-boron alloy. Holding force 110 gr.

1 piece 5-pin miniature cable connector. Plug, 2-part, reverse polarity protected. 8mm diameter, solder connection. Load capacity 60V/3A per contact. This article is only available in the new version as a 2-part article! Matching counterpart: Article 7643, 7630 (not included).

1x eyebolt M2x11, nickel-plated brass. 1 piece. Head 4mm outside. Bore 1,7mm. If not available, we may supply M2x16mm!

Spring steel wire 2,0mm diameter, 1m long in straightened rods, polished DIN 17223

Neodymium magnet, round, 5mm diameter, 2mm thick, high holding power, N40 nickel, sintered neodymium iron boron alloy. Holds approx. 650g.

1 resistor, axial leaded, 180 Ohm 0,25W, carbon layer 5% brown-grey-brown.

Spring steel wire 3,0mm diameter, 1m long in straightened rods, polished DIN 17223

1 resistor, axial leaded, 560 Ohm 0,25W, carbon layer 5% green-blue-brown.

Ruderer 530 plastic adhesive, crystal clear, 20g pack (tube) 530TF. Ideal adhesive for bonding polystyrene parts. 1 tube. Crystal clear adhesive for bonding a wide variety of plastics such as celluloid, plexiglass, PVC, polystyrene and PSB, SAN, ABS plastics to each other and to each other as well as to metal, glass, ceramic, wood and many more. Bonding surfaces must be clean, dry and free of oil. Apply adhesive and immediately bond wet. Secure sufficiently until hardened.Signal word DangerHazard statementsH222 Extremely flammable aerosol.H225 Highly flammable liquid and vapor.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.Safety instructionsP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P241 Use explosion-proof (electrical/ventilation/lighting) equipment.P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Flush skin with water [or shower].P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.P405 Store locked up.P501 Dispose of contents/container to hazardous or special waste collection point.Warning! Not suitable for children under 14 years.

1 pc. 5-pin miniature cable coupler. Coupling, 2-piece, protected against polarity reversal. 8mm diameter, solder connection. cable box. Load capacity 60V/3A per contact. Matching counterpart: Article 7624, 7644 (not included).

1 x 5-pin miniature plug connection. Installation socket (socket), reverse polarity protected. Approx. 8x8x17mm with solder connection. Load capacity 60V/3A per contact. Diameter for mounting hole: 6,2mm. Matching counterpart: Article 7642 (not included).

Neodymium magnet, square, 5x5mm, gold-plated, 2mm thick, high holding force, N50, sintered neodymium-iron-boron alloy. Holding force 0,75 kg.

m silicone wire, 0,25 qmm, black, extremely smooth. 130 x 0,05qmm veins. Outer diameter approx 1,2mm. Endurance: Max 48V.. Max. 4,5A.

Messingrohr MS63 3x0,45mm 2,1mm inside 1m long.

Messingrohr MS63 3x0,3mm 2,4mm inside 1m long.

Spring steel wire 0,8mm diameter, 1m long in straightened rods, polished DIN 17223

1x AMP socket gold-plated, white, 2-pin. 1 piece. Scope of delivery: 1 socket housing, 2 crimp/solder contacts (socket). Weight: 1,8g. Contact resistance: 3,6 milliOhm Current load: 15A (continuous), 30A (max. 2 minutes) Dimensions: 22x14x9mm Max. cable cross-section: 1,5qmm, AWG15

1x AMP connector, gold-plated, white, 2-pole. 1 piece. Scope of supply: 1 connector housing, 2 crushing / solder contacts (pin).

BEC socket, loose, 1 piece. 2 pole. Reverse polarity protected.

1 resistor, axial leaded, 200 Ohm 0,25W, carbon layer 5% red-black-brown.

Round brass 3,0mm, 1m long, MS

Hinge (brass-plated) 9x10mm 5 pieces. 7809/03. 2 holes with 1mm diameter per hinge part. Mounting holes: 1mm diameterWe recommend brass screws with 1,0mm for assembly:Length 6mm: Article 5049Length 8mm: Article 3147/8318Nuts to match these screws: Article 3146Matching socket wrench for these hexagon screws: Article 6 Screws and socket wrench are not included.

1x 2,0mm white polystyrene sheet, approx. 400 x 1000 mm. Dimensional deviations of up to +/-4mm are possible! Weight approx. 850g/sheet. This item can only be shipped as a parcel.

Round brass 0,8mm, 1m long, MS machining Quality

1 x 5-pin miniature plug connection. Installation socket (plug), reverse polarity protected. Approx. 8x8x17mm with solder connection. With fastening nut. Load capacity 60V/3A per contact. Diameter for fastening hole: 6,2mm. Matching counterpart: Article 7643 (not included).

5 hinges (brass) 8x4mm not unfolded (14x4mm unfolded), 2 holes per tab. (Scope of delivery: 5 pieces). 7809/01. Mounting holes: 0,8mm diameter, max. opening angle approx. 260°. We recommend brass screws with 0,8mm for assembly: Length 4mm: Article 7169 Length 6mm: Article 7170 Length 8mm: Article 7171 Nuts to match these screws: Article 8302 Matching socket wrench for these hexagon screws: Article 6 Screws and socket wrench are not included.

1x miniature deep groove ball bearings d5-D09-B3 MR 95-2Z, both sides metal sealing washers inside 5mm, outside: 9mm, Width: 3mm.

Spring steel wire 1,2mm diameter, 1m long in straightened rods, polished DIN 17223

1 10 pin strip-pole (2x5) just contacts. PLUG. To activate / soldering. Pitch 2,54mm (RM2,54). RoHS Compliant. Approximately 12x5mm. THT. Gold plated contacts.

1 pair of T-connectors. Approx. 25x13x8mm when plugged together. 5gr. With solder connection. Max. cable cross-section 4 sqmm. Red-brown plastic housing. Current carrying capacity: Continuous: 36A2 min.: 50A Pulse: 70A

1 resistor, axial leaded, 680 Ohm 0,25W, carbon layer 5% blue-grey-brown.

1 eyebolt M2 right-hand thread, brass Thread length 10mm (1 piece), 2mm hole.

Brass tube MS63 1,0x0,20mm 0,6mm inside 1m long

m silicone wire, 0,50 qmm, black, extremely smooth. 270 x 0,05qmm veins. Outer diameter approx 1,5mm. Endurance: Max 48V.. Max. 7,5A.

Round brass 2,5mm, 1m long, MS machining Quality