Filter
1 BID chip (Battery-ID) for storing
1 BID chip (battery identification) For storing battery data and parameters. 1 BID chip WITH 30cm cable. (4-pin) Safe and easy operation as well as automatic storage of the most important battery data in the robbe BID system. Simply connect the BID chip to the charger and start the charging process. The BID chip automatically makes all necessary settings on the charger. The BID chip prevents incorrect settings on the charger, which could damage the battery. The BID chip is so small and light (0,5 grams) that it can be attached to the battery can be attached or shrunk in. There are plug-in connections on both sides of the chip, which enable easy handling and save cable weight. The following data is stored in the chip: (charging settings) Battery type Number of cells Battery capacity Charging current Discharging current Date (initial commissioning) Delta peak Switch-off voltage Switch-off temperature (per charging process) :current loaded capacitycurrent discharged capacitymaximum charged capacitymaximum discharged capacityNumber of charging cycles

Available immediately, delivery time: 1-4 days

Product number: 8050

€ 7,50 *
%
Carson Battery Charger Set 4 A
Battery charging set 4 A This set consists of a 230 V charger with 4 A charging current and automatic charging cut-off (Delta Peak) as well as a racing pack with 7,2 V/ 3000 mAh NiMH and 4 Mignon batteries for the transmitter.Scope of delivery: - 230 V charger with 4 A charging current.- automatic charging cut-off (Delta Peak)- racing pack with 7,2 V/ 3000 mAh NiMH- 4 Mignon batteries for the transmitter.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10749

€ 64,99 * € 76,99 * (15.59% saved)
%
1 charger Expert Charger XBase 2.0se. Max. 4A
1 charger Expert Charger XBase 2.0se. Max. 4A. 12V power supply integrated. Fast charging 0,1-4,0A. 1 exit. Illuminated LCD display. Input voltage 12V (via battery) or via mains voltage 230V. Charging current 0,1A - 4ABalance current approx. 150mA (XHP connector)User-friendly, microprocessor-controlled charger for at home and on the go. Programming via blue illuminated display. Delta peak for monitoring or automatically terminating the charge. 1 charging output and balancer connection for charging all common battery types.Scope of delivery:1 EXPERT Carger xbase 2.0se charger1x 12V power supply1x balancer adapter : 1-1 cells Li-XX and 12-230 cells NiM, NiCd, lead batteries 11-18 cells. Integrated balancer + XHP adapter Delta peak switch-off Weight: approx. 0,1 g. Size: approx. 4 x 1 x 4 mm

Available immediately, delivery time: 1-4 days

Product number: 8512

€ 50,99 * € 57,99 * (12.07% saved)
%
1 BID chip (Battery-ID) for storing
1 BID chip (battery identification) For storing battery data and parameters. Safe and easy operation as well as automatic storage of the most important battery data in the BID system. Simply connect the BID chip to the charger and start the charging process. The BID chip automatically makes all necessary settings on the charger. The BID chip prevents incorrect settings on the charger, which could damage the battery. The BID chip is so small and light (0,5 grams) that it can be attached to the battery can be attached or shrunk in. There are plug-in connections on both sides of the chip, which enable easy handling and save cable weight. The following data is stored in the chip: (charging settings) Battery type Number of cells Battery capacity Charging current Discharging current Date (initial commissioning) Delta peak Switch-off voltage Switch-off temperature (per charging process) :current loaded capacitycurrent discharged capacitymaximum charged capacitymaximum discharged capacityNumber of charging cycles

Available immediately, delivery time: 1-4 days

Product number: 8049

€ 7,60 * € 7,78 * (2.31% saved)
%
POWER PEAK B7 charger (Multiplex) .Leistungsfähige Statio
1 POWER-PEAK B7 charger (multiplex). Powerful charging station with battery management and integrated power supply unit. With integrated equalizer and BID system. 12V / 230V charger with max. 10A. Compact and powerful charging/discharging station with battery management. -BID system display of capacity, voltage, equalizer single cell voltage Optionally automatic or manual charging / discharging, BID system, display of: charged and discharged capacity, input and charging voltage, equalizer single cell voltage.Battery types: LiPo, Lilon, LiFe, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-7, NiXX: 1-16, Pb/lead: 1-12Input voltage: 10-15V DC or 230V ACCharging current: 0,1 - 10ADischarging current: 0,1 - 10A (max. 5W)Equalizer current: 280mADimensions: 130 x 80 x 35mmWeight: 230gScope of delivery:Charger, power cable, connection cable 12V DC, switching power supply 230V -5A, BID key.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9921

€ 78,55 * € 80,90 * (2.9% saved)
%
CARSON Charger Beginner NiMH LIPO 1 / 3 / 5A
1x CARSON Charger Beginner NiMH LIPO The CARSON Expert Charger Beginner is a quick charger for LiPo/LiFe and NiMH/NiCd battery packs. Thanks to the integrated power supply and its top price-performance ratio, it is ideal for beginners and suitable as a second device for on the go. The compact charger has a 2/3S balancer and charges with up to 5 A charging current.Scope of delivery: EXPERT CHARGER for Beginners charger, T-Plug charging cable, TAMIYA-Plug charging cable, manual DEU / ENG.Technical details:- Input voltage power supply: 100-240 V, 50/60 Hz (AC)- Charging current: 1,0 A / 2,0 A / 5,0 A / max. 50 W- Battery types: 2S/3S Li-xx (7,4-11,1 V), 1-8 cells- NiMH (1,2-9,6 V) integrated balancer + XHP plug system- Weight: 490 g- Size: 110x109x49 mm

Available immediately, delivery time: 1-4 days

Product number: 10175

€ 43,99 * € 47,99 * (8.34% saved)
%
BID key (battery identification) For storing
1 BID key (battery identification) for storing battery data and parameters. BID system = battery identification system. Safe and easy operation and automatic storage of the most important battery data in the BID system. Simply connect the BID key to the charger and start the charging process. The BID key automatically makes all the necessary settings on the charger. The BID key prevents incorrect settings on the charger, which could damage the battery. The BID key is so small and light (4,5 g) that it can be attached to the battery. The key has plug connections that make it easy to use and save cable weight. The following data is stored in the BID key: (Charging settings) Battery type Number of cells Battery capacity Charging current Discharge current Date (first use) Delta peak cut-off voltage Cut-off temperature (per charging process): Current charged capacity Current discharged capacity Maximum charged capacity Maximum discharged capacity Number of charging cycles

Available immediately, delivery time: 1-4 days

Product number: 11457

€ 5,95 * € 6,30 * (5.56% saved)
%
1 BID cable (battery identification) 50cm cable (4-pole)
1 BID cable (battery identification) 50cm cable (4-pin) on both sides with BID-plugs. WITHOUT BID chip!

No longer available

Product number: 8051

€ 5,55 * € 5,90 * (5.93% saved)
%
1 charger Powerpeak Uni7 EQ, 230V. (8564). With 7
1 charger Power Peak Uni7 EQ, 230V. (308564). With 7 charging outputs that can all be used simultaneously. Total charging current max. 3,6A. The charging outputs are divided according to battery type: 2 outputs with CC-CV shutdown for LiPo/LiFe batteries with integrated balancer. 4 constant current outputs for NiCd/NiMH batteries, one of which has a delta peak shutdown. Output 7 is also equipped with a CC-CV shutdown and is set for the voltage level of lead batteries. - Short circuit protection - Reverse polarity protection - Protection against incorrect connection Output 1: 1000mA 1-4S LiPo/LiFe cells with CC-CV shutdown and equalizer. Output 2: 500mA 1-4S LiPo/LiFe cells with CC-CV shutdown and equalizer. Output 3: 1000mA 4-8 NiCd/NiMH cells with delta peak shutdown. Output 4: 250mA 4-8 NiCd/NiMH cells. Output 5: 250mA 4-8 NiCd/NiMH cells. Output 6: 120mA 4-8 NiCd/NiMH cells. Output 7: 500mA for 1,3, 6 or 150 cell lead battery with CC-CV shutdown. Technical data: Dimensions: 130x80x560mm Weight: XNUMXg.

No longer available

Product number: 7026

€ 37,95 * € 39,90 * (4.89% saved)
Multifunction charger e680 AC / DC. Compact loading / unloading
Multifunctional charger e680 AC/DC. Compact microprocessor-controlled quick charge/discharge device with balance function. For 12V or mains operation. Universal charger e680 for 12V or mains operationCompact microprocessor-controlled quick charge/discharge device with balance function and built-in power supply. For mobile use, the device can be operated on a 12V car battery or other direct current power source with a voltage between 11 and 18V. The improved version of the e660 charger, the SkyRC e680 is suitable for all common battery types: LiPo, Li-ion, LiFe, NiCd, NiMH, PB and also the new generation LiHV with final voltage 4,35V. Increased maximum charging power of 80W and 8A charging current. The discharge power has also been doubled. In particular, the e680 charger supports charging DJI Mavic batteries with a maximum charging current of 4 A. When operated from the mains, the DC socket can supply power with a voltage of 13,8 V and a maximum output of 80 W. This makes the SkyRC e680 a power supply unit that can be used to operate many devices with a nominal voltage of 12V, such as workstation lighting, mobile chargers, soldering irons or fans.Other features Battery voltage meter Battery resistance meter Charging LiHV batteries Charging DJI Mavic batteries (charging current 4A with optional charging cable) AGM & cold charge mode (charging AGM batteries even at low temperatures) High speed fan built in Suitable for the following battery types/sizes LiPo battery LiHV battery LiFe battery LiIon battery 1 - 6 cells NiMH battery NiCd batteries 1 - 16 cells PB (lead batteries) Features: - Illuminated display - Automatic cell detection - Built-in balancer - Delta peak shutdown - Quick charge and trickle charge - Automatic charge limit setting - Cyclic charge/discharge program repetition - Input voltage monitoring - Adjustable safety timer for NiMH / NiCd batteries - Individually programmable charge/discharge processes for 10 different battery types - Thermal monitoring of the battery to be charged via optional temperature sensorScope of delivery: Charger e680 Connection cable 12V + power cable EU XH balancer adapter board for 2 - 6 cells Instructions and charging cable with XT-60 plug Technical dataAC input voltage 100-240 voltsDC input voltage 11-18 voltsCharging power max. 80 WDischarge power max. 10 WAdjustable charging current 0,1-8,0 AAdjustable discharging current 0,1-2,0 ADC output (direct current): 1,8 volts / 80 WWeight 390 gDimensions 135x110x60 mm

Available immediately, delivery time: 1-4 days

Product number: 12167

€ 59,94 *
%
CARSON Expert Charger Duo 2.0 500608190
CARSON Expert Charger Duo 2.0 Charging current max. 6A/output Discharge current max. 2A. 230AC or 11-18V DC. NiMH, NiCD. Li-XX, Pb batteries 2 outputs. 175x150x65mm. 950g

Available immediately, delivery time: 1-4 days

Product number: 10417

€ 119,00 * € 155,00 * (23.23% saved)
Charger Expert Charger NiMH 1Ah. Plug-in charger for
1 Charger Expert Charger NiMH 1Ah. Plug-in charger for 6-cell NiMH battery packs. Charging current 1000 mA / 8,4V. Input voltage: 100-240V. Automatic shutdown after loading.

Available immediately, delivery time: 1-4 days

Product number: 11372

€ 19,99 *
%
Charger (Hitec) X1RED. 12V/230V charger with max. 6A
1 charger (Hitec). 12V/230V charger with max. 6A. Charging/discharging device. X1-RED. Universal charger for home and on the go at a fair price. Illuminated display. 12V/230V charger with max. 6A. LCD screen.Charging, discharging, cyclic charging/discharging NiXX, balancing LiXX, battery voltage display (LiXX), warning signals, safety functions.Battery types: LiPo, Lilon, LiFe, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-6, NiXX: 1-16, Pb/lead: 1-6Input voltage: 11-18V DC or 100-230V ACCharging current: max. 6ADischarging current: up to 2ADimensions: 123 x 73 x 159mmWeight: 470gScope of delivery:Charger, connection cable 220V AC, universal charging cable with multiplex plug, 1x XT60 cable, 1x balancer adapter board (MPX/TP/FP).Operating instructions.12V / 230 V charger with max. 6AThe HITEC charger X1 RED is a microprocessor-controlled 12V / 230 V ultra-performance charger with management functions for all common battery types. Its slim tower design enables easy front operation. All inputs: 4mm battery plug, balancer connection (XH), temperature sensor ports, USB-5V/2,1A and Micro B-USB. Special features are the easy-to-read 3,2-inch LCD screen and the HITEC Charge Master software, with which you can conveniently operate the X1 RED via the computer. This compact 60-watt power charger allows you to carry out all your charging processes easily and conveniently. Features: Optimized operating software 10 different charging/discharging profiles Integrated balancer for lithium batteries Suitable for different lithium battery types Lithium charging programs: Normal, Fast, Balance and Storage Charging PC Charge Master Software Efficient fan for maximum performance with low heat generation Slim tower design Reverse polarity protection

Available immediately, delivery time: 1-4 days

Product number: 12363

€ 84,99 * € 87,87 * (3.28% saved)
%
1 Charger Expert Charger Duo 12V / 230V. Max. 10A
1 charger Expert Charger Duo 12V/230V. Max. 10A. 12V power supply integrated. 2 charging outputs that can be used at the same time. Large illuminated LCD display. Input voltage 12V (via battery) or via mains voltage 230V. Charging current 0,1A - 10A (output 1), 0,1A - 5A (output 2)Discharge current 0,1A - 10A (only output 1)Balance current approx. 150mA (XHP connector)User-friendly, microprocessor-controlled 2-fold Charger for at home and on the go. Programming via blue illuminated display. Delta peak for monitoring or automatically terminating the charge. 2 charging outputs and 2 balancer connections for charging all common battery types at the same time.User-friendly dual charger for at home and on the go.With charging output 1, batteries can be discharged/charged or charged/discharged with up to three cycles. These always ensure a fresh battery.The charging output 2 is intended for pure charging processes.The charging is monitored and automatically ended using delta peak.The following battery types can be charged with the Carson Expert Charger Duo:- NiCd/NiMH- Li-Po- Li -Fe- Li-Ion- PbUsing the display, the charging process can be optimally monitored and the following values ​​can be called up or set: battery type / cell, state of charge, voltage, ampere, time, input voltage, peak value, average value and capacity.Technical details:Input voltage: using Battery/power supply 11V-15V via mains 110V-230V (50/60Hz) Charging power: 70W (if only charging output A is used / 2x 35W (if both charging outputs are used at the same time) Discharging power: 5W (only charging output A) Charging current: 0.1A – 10A (charging output A), 0.1A-5A (charging output B) Discharge current: 0.1A - 10A (only charging output A) Balance current: approx. 150mA (XHR connector) Trickle charge: approx. 80mA (only for NiCd/NiMH batteries) - NiCd /NiMH (1.2V) (1 - 15 cells) - Li-Po (3.7V) (1 - 6 cells) - Li-Fe (3.3V) (1 - 6 cells) - Li-Ion (3.6V) (1 - 6 cells)-Pb (2V - 24V) (1-12 cells) End-of-discharge voltages:- 0.8V per cell, NiCd and NiMH- 3V per cell, Li-Po/Li-Ion- 2.5V per cell, Li-Fe- 1.8V per cell, Pb

No longer available

Product number: 7682

€ 95,99 * € 115,99 * (17.24% saved)
%
Carson Expert Charger NiMH Compact 1A
Expert Charger NiMH Compact 1A especially for cars, boats & remote controls.Technical data:Charger- Input voltage: 100-240 V, 50/60 Hz (AC)- Charging current 1000 mA / 8,4 V- Battery types: 6-cell 7,2 V NiMH drive battery- NiMH 7,2 V / 2100 mAh TAMIYA plug transmitter batteries- AA Mignon 1,5 V Scope of delivery:- Plug-in charger, 7,2 V / 2100 mAh NiMH drive battery- 4x AA Mignon batteries, manualTechnical details:- Automatic switch-off after charging- Suitable for NiMH 6-cell batteries with 7,2 V TAMIYA plug

No longer available

Product number: 10751

€ 35,09 * € 39,99 * (12.25% saved)
%
1 Multi Charger (Hitec). 4-way professional charging / Entladegerä
1 multi-charger (Hitec). 4-way professional charger/discharger for 12 and 220V. Microprocessor-controlled high-performance charging/discharging station HiTEC X4ACplus. 4-way charger with power supply and 12V input. Maximum power 4x 6A simultaneously! Processor-controlled high-performance charging/discharging station, with management/care functions for all common battery types. With integrated equalizer for 6-cell Li-Po/Li-Ion/Li-Fe batteries.Features:for Li-Po, Li-Fe, Li-Ion, NiCD, NiMh, Pb batteriesCharging/dischargingcyclic charging/discharging (Nixx)Balancer (LiXX)Battery voltage display (LiXX)Safety functionsMax. number of cells: Li-Po/Li-Fe: 1-6 cells, NiCd/NiMh: 1-15 cells, Pb: 2-20VInput voltage DC: 11-18VInput voltage AC: 110-240VCharging/discharging currents: 0,1-6A (max. 4x 50W)/0,1-1A (max. 4x 5W)Dimensions/weight: 255x170x66mm / 1,73kg

No longer available

Product number: 7969

€ 235,00 * € 293,90 * (20.04% saved)
%
Power Peak D7 charging station. 2-times charge / discharge device
1 POWER-PEAK D7 charger (multiplex). Powerful 2-way home charging station with battery management and integrated power supply unit. With 2 integrated equalizers and BID system. Both outputs can be used completely independently of each other! 2-way charger with power supply unit, 12V (DC) and 220V (AC) input. BID chip function! (Battery Identification System) Maximum power 2x 20A simultaneously! Processor-controlled high-performance charging/discharging station, with management functions for all common battery types. With integrated equalizers for 1 to 7 cell Li-Po/Li-Ion/Li-Fe batteries.Features:for Li-Po, Li-Fe, Li-Ion, NiCD, NiMh, Pb batteriesCharging/dischargingBalancer (LiXX)Battery voltage display (LiXX)Safety functionsMax. number of cells: Li-Po/Li-Fe: 1-6 cells, NiCd/NiMh: 1-18 cells, Pb: 2-24VInput voltage AC: 110-240V, DC:10,5-18VCharging/discharging currents: 0,1-20A (per output)Dimensions/weight: 270x200x85mm / 2,6kgOf course, batteries with and without a BID chip can be charged! Set contents:Charger, power cable, crocodile clips, BID key, instructions.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9701

€ 320,00 * € 349,00 * (8.31% saved)
Charger Expert Charger NiMH 500 mAh. Steckerladegerät
1 Charger Expert Charger NiMH 500 mAh. Plug-in charger for 6-cell NiMH battery packs. Charging current 500 mA / 8,4V. Input voltage: 100-240V. Automatic shutdown after loading.

Available immediately, delivery time: 1-4 days

Product number: 11371

€ 15,99 *
%
POWER-PEAK C8 charger (multiplex). Computer-charging station
1 POWER-PEAK C8 charger (Multiplex). Powerful computer charging station with battery management and integrated power supply unit. With integrated equalizer and BID system. 12V / 230V charger with max. 10A.High-performance computer charging/discharging station with battery management.BID system display of capacity, voltage, equalizer single cell voltage, charging time, battery storage (BID), battery type, etc.Optional automatic or manual charging/discharging, BID system, display of: charged and discharged capacity, input and charging voltage, equalizer single cell voltage.Battery types: LiPo, Lilon, LiFe, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-8, NiXX: 1-21, Pb/lead: 1-8Input voltage: 10-15V DC or 230V ACCharging current: up to 10ADischarge power: up to 35WEqualizer current: 250mABID chip system: yesDimensions: 145 x 180 x 70mmWeight: 750gr.Scope of delivery:Charger, power cable, connection cable 12V DC, equalizer adapter JST/XH, 2 crocodile clips (red/black), BID key.Every battery pack to be charged can be equipped with the BID system. The following BID items are available for this (not included): BID key, item 11457 BID chip, items 8049, 8050 BID cable, item 8051 (not required for BID key)  

No longer available

Product number: 11456

€ 116,85 * € 124,90 * (6.45% saved)
%
Equalizer adapter JST, multiplex. balancer connection
Equalizer adapter JST, multiplex. Balancer connection to charger: EH. adapters and adapter cables.

Available immediately, delivery time: 1-4 days

Product number: 12417

€ 4,20 * € 4,40 * (4.55% saved)
%
Charger POWER PEAK B6 EQ-BID, Multiplex. Compact Statio
1 charger POWER PEAK B6 EQ-BID. Compact, inexpensive charging/discharging station with 12V and 230V connection. 12V / 230V charger with max. 5A.Compact and inexpensive charging/discharging station with battery management.BID system display of capacity, voltage, equalizer single cell voltage Optional automatic or manual charging/discharging, BID system, display of: charged and discharged capacity, input and charging voltage, equalizer single cell voltage.Battery types: LiPo, Lilon, LiFe, LiHV, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-6, NiXX: 1-14, Pb/lead: 1-6Input voltage: 10-15V DC or 230V ACCharging current: 0,1 - 5ADischarging current: 0,1 - 10A (max. 5W)Equalizer current: 300mADimensions: 142 x 89 x 25mmWeight: 230gr.Scope of delivery: charger, power cable, connection cable 12V DC, switching power supply 230V -5A, temperature sensor, BID chip, USB cable, balance adapter 2-6S (TP/JST/XH), universal charging cable with crocodile clips, receiver and transmitter charging cable Futaba.

No longer available

Product number: 7733

€ 99,00 * € 109,90 * (9.92% saved)
%
1 switching power supply SPS-9400. 3-15V/40A. Strong switching network
1 switching power supply SPS-9400. 3-15V/40A. Powerful switching power supply with digital display for current and voltage values. Input: 230V/AC. Output power: 600W Weight 3,5kgDimensions: 300x220x110mmmax. Load current 40A.Output voltage: 3-15V continuously adjustable.Switchable to 13,8V constant voltage operation.An ideal home power supply for stationary operation of 12V chargers in the model workshop.Operating voltage: 230V AC/50HzOutput voltage: 3-15V DC adjustable or 13,8V fixed voltageOutput current: max. 40AShort-term output current: 43AResidual ripple and noise: <50mVDisplays / measuring devices: LED 3-digit digital multimeter for voltage and current, 2-color status LED (red=fault/green=operation)Cooling: fanSafety: Protection against overload and overheating, short circuit and reverse polarity protection, output voltage protection at 16,5VDark gray metal housing with rubber feet.High efficiency:> 78%.The device is available as a single device NOT suitable as a charger!

Ready to ship in 15 days, delivery time 1-4 days

Product number: 9025

€ 228,99 * € 239,00 * (4.19% saved)
%
Expert Charger NiMH Compact 4A charging set, charger and battery
Expert Charger NiMH Compact 4A charging set. Contains: 1x charger for 6-cell NiMH batteries with 4A charging current. 1 battery 7,2V/4000 mAh. 4x AA batteries. Charger for 6-cell NiMH battery packs with a charging current of 4 A and automatic switch-off after charging. With TAMIYA connection plug. The status LED shows the current charge level. Also included is a 6-cell 7,2V NiMH battery with 4000 mAh and 4 AA batteries 1,5V. Technical details: Automatic shutdown after charging Suitable for NiMH 6-cell batteries with 7,2 V TAMIYA plug Technical data: Charger: Input voltage: 100-240 V, 50/60 Hz (AC) Charging current 4 A / 8,4 V Battery types: 6-cell 7,2 V NiMH Drive battery: NiMH 7,2 V / 4000 mAh TAMIYA plug Transmitter batteries: AA Mignon 1,5 V

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10823

€ 68,98 * € 76,99 * (10.4% saved)
%
Expert Charger Car & Radio Set. charging set
Expert Charger Car & Radio Set. Charging set. Contains: 1x charger for 6-cell NiMh batteries with 2A charging current. 1 battery 7,2V/3000 mAh. 4x AA NiMh battery cells 2100mAh. Charging cradle.Especially for cars, boats & remote controls.Technical data:Charger- Input voltage: 100-240 V, 50/60 Hz (AC)- Charging current output 1: 2000 mA- Charging current output 2: 500mA- Battery types: 6-cell 7,2 V NiMH drive battery- NiMH 7,2 V / 3000 mAh TAMIYA plug transmitter batteries- 4x AA Mignon NiMh 1,2 V / 210mAh Scope of delivery:- Car & Radio charger- 1x drive battery 7,2V / 3000mAh- 4x AA Mignon batteries, manualTechnical details:- Automatic switch-off after charging (both outputs)- Suitable for NiMH 6-cell batteries with 7,2 V TAMIYA plug

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12456

€ 66,60 * € 70,99 * (6.18% saved)
%
Multi-Charger (Hitec H4) .4 times professional charger / discharger
1 multi-charger (Hitec). 4-way professional charger/discharger for 12V. HiTEC H4. Microprocessor-controlled high-performance charging/discharging station. 12V 4-way charger with max. 16A.Its high-quality aluminum housing, the very easy-to-read graphic display, with intuitive operation and the 4 microprocessor-controlled charging outputs with integrated balancers make the HiTEC H4 the perfect charger.Charging, discharging, storage charging LiXX, cyclic charging NiXX, balancing LiXX, multi-peak NiXX.Battery types: LiPo, Lilon, LiFe, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-6, NiXX: 1-15, Pb/lead: 1-12Input voltage: 11-18V DCCharging current: 0,1 - 8A (4A max. 120W, 2x max. 240W)Discharging current: 0,1 - 2A (max. 10W) ​​or 4A (max. 20W)Dimensions: 205 x 163 x 52mmWeight: 1200gr.Scope of delivery:Charger, connection cable 12V DC, crocodile clips, channel bridge cable (Y-cable), universal charging cable with UNI plug, Tamiya, Traxxas, Deans 2-pin, H4 mounting bracket.

No longer available

Product number: 8513

€ 196,00 * € 279,90 * (29.97% saved)
%
1 PowerBox (Hitec). ePowerBox 17A
1 PowerBox (Hitec). ePowerBox 17A. Power supply with 17A Power supply specially adapted to the X1 Pro charger, but which can also be used as a compact power supply for other chargers worldwide.Features:- LED indicator- Powerful fan- Input voltage 100-240V for worldwide use- Active power factor correction filter for safe operation- Two outputs/top and side- With on/off switch- USB socket for mobile devicesFunctions:- regulated fan- Input voltage AC: 100 - 240 Volt- Output voltage: 13,8 Volt DC +/-0,2V- Output current: 17 A + /-0,5 A- USB output: 5 V 2,1 ADelivery contentsPower supply ePOWER BOX 17A, power cable 230 VTechnical dataWidth: 126 mmHeight: 51 mmLength: 92 mmWeight: 0.602 KgInput voltage: AC 100-240 VPower in watts: 330BID chip system: No

No longer available

Product number: 10218

€ 84,49 * € 99,90 * (15.43% saved)
%
Switching power supply DM-30-E. 9-15V/25A DC. Strong switching power supply
Switching power supply DM-30-E. 9-15V/25A DC. Powerful switching power supply with digital display for current and voltage values. Input: 230V/AC. Weight 1,5kgDimensions: 205x155x75mmmax. Load current 25A.Output voltage: 9-15V continuously adjustable.Switchable to 13,8V constant voltage operation.An ideal home power supply for stationary operation of 12V chargers in the model workshop.Operating voltage: 230V AC/50HzOutput voltage: 9-15V DC adjustable or 13,8V fixed voltageOutput current: max. 25AShort-term output current: 30AResidual ripple and noise: <80mVDisplays/measuring devices: LED 3-digit digital multimeter for voltage and currentCooling: temperature-controlled fanSafety: Protection against overload and short circuitDark gray metal housing with rubber feet.The device is NOT suitable as a charger as a stand-alone device!

No longer available

Product number: 10495

€ 114,95 * € 119,00 * (3.4% saved)
%
Switching power supply SPS-9250. 3-15V / 25A. Strong
1 switching power supply SPS-9250. 3-15V/25A. Powerful switching power supply with digital display for current and voltage values. Input: 230V/AC. Output power: 380W Weight 2,7kgDimensions: 220x220x110mmmax. Load current 25A.Output voltage: 3-15V continuously adjustable.Switchable to 13,8V constant voltage operation.An ideal home power supply for stationary operation of 12V chargers in the model workshop.Operating voltage: 230V AC/50HzOutput voltage: 3-15V DC adjustable or 13,8V fixed voltageOutput current: max. 25AShort-term output current: 28AResidual ripple and noise: <50mVDisplays / measuring devices: LED 3-digit digital multimeter for voltage and current, 2-color status LED (red=fault/green=operation)Cooling: fanSafety: Protection against overload and overheating, short circuit and reverse polarity protection, output voltage protection at 16,5VDark gray metal housing with rubber feet.High efficiency:> 78%.The device is available as a single device NOT suitable as a charger!

Available immediately, delivery time: 1-4 days

Product number: 12252

€ 186,79 * € 198,00 * (5.66% saved)
%
BID cable (battery identification) 30cm cable (4-pin)
1 BID cable (battery identification) 30cm cable (4-pin) on both sides with BID-plugs. WITHOUT BID chip!

Available immediately, delivery time: 1-4 days

Product number: 12612

€ 10,98 * € 11,50 * (4.52% saved)