Aluminum warning signs with decoration. (2 pieces). For example for Goldhofer low loaders. Aluminum warning signs for low loaders and trailers.Scope of delivery:2 aluminum warning signs with integrated holder, warning decoration, fastening screws.

Ramp drive for Goldhofer trailer TU-4 (Carson). With motor for 7,2-9,6V. Ramp drive suitable for the Goldhofer-TU4 low-loader trailer from Carson (item 10831 - not included). The drive set is mounted on the model and controls the ramps with a gear motor. The upper and lower end positions are each secured with a limit switch! The limit switches are already wired and ready for installation. All that remains is to solder the cables to the motor! A battery voltage of 7,2-9.6 volts is intended for operation. If operation must be carried out with a higher voltage (e.g. 12V), you can use a speed controller and operate it with only approx. 60% "servo travel". As a big highlight, the ramps can still be moved sideways! Even if this is not possible remotely, the semi-trailer can still be driven by very small models!Scope of delivery:- Gear motor- Worm gear (worm pre-mounted on shaft)- Limit switch, pre-mounted and wired- New, continuous shaft for ramps- Side cover caps for shaft- New ramp holders, suitable for new shaft (can be moved sideways!)- Gear housing base plate (acts as a drilling template)- Gear housing cover (left and right)- Instructions, screws, cableOperation is possible with a polarity reversal switch or speed controller (not included!)Speed ​​controller: Thor4 (item 3020)Polarity reversal switch: items 9856, 3569.

Carson Goldhofer-TU4 low loader trailer, Tamiya scale. Kit with assembly instructions. With 2 access ramps and support. Unpainted. Weight approx. 5000g. (907400) - Kit, laser-cut sheet steel, one-piece ramps (manually foldable and adjustable) - Double ball-bearing bogie - Leaf-sprung axles with pedal compensation - Rear support manually adjustable - 7-chamber taillights - License plate holder - Semi-circular fender - 16 ball-bearing wheels - Wooden supports - Widening - Underrun protection - Decal sheet - Assembly instructions Technical data: Length: 855mm Width: 195mm Height: 265mm A motor-driven ramp drive is available under item number 11440. The optional item 11815 is available as a wooden transport box. Real wood planking for the bed is available as item 11824 here in the shop.

Transport box made of 9mm birch multiplex. The box is ready to use and painted with 2K clear varnish. A sturdy metal handle (foldable) is embedded on the top. Dimensions for Carson Riedler trailer Matching the Carson Riedler trailer and Carson Fliegl rear tipping semi-trailer.The blocks supplied can be mounted on the included sliding floor to secure and lift the model. The model then sits on the frame parts, so that there are guaranteed to be no more flat spots on the tires.Internal dimensions:Length: 650mmWidth: 240mmHeight: 350mmExternal dimensions:Length: 670mmWidth: 260mmHeight: 380mmWeight: 6,4kgThe models/accessories shown are NOT included in the scope of delivery, but are for illustration purposes only!From now on, a new type of wood will be used as the panel material.

Transport box made of 9mm birch multiplex. The box is ready to use and painted with 2K clear varnish. A sturdy metal handle (foldable) is embedded on the top. Dimensions for Carson TU4! The blocks supplied can be mounted on the included sliding floor to secure and lift the model. The model then sits on the frame parts, so that there are guaranteed to be no more flat spots on the tires. Internal dimensions: Length: 850mm Width: 220mm Height: 280mm External dimensions: Length: 880mm Width: 240mm Height: 320mm Weight: 8,2kg

Carson 2-axle central axle tipping trailer New for the 2019 toy fair. Ideal addition to the Arocs 3348 rear tipper from Tamiya Technical data Length 570mm Width 190mm Height 200mm Weight 3kg External dimensions of the tipping trough: 397x187x80mm Steel frame, laser cut and welded Trough made of hard PVC 8-way ball bearing wheels Off-road wide tires with rims 7-chamber tail lights Trailer axles with dummy air springs Automatic 2-hook rear wall locking -Accessories Spindle drive, article 9043 (not included) Gear motor Switch dump truck hitch (article 7876, not included) 7-chamber lighting board 7,2V (article 3104, not included) License plate lighting 7,2V Aluminum rims round hole article 9979 (not included) Aluminum rims Long hole article 5612 (not included) The manual drawbar support cannot be replaced by the electric support of the Fliegl Stonemaster! The tractor shown in some pictures is NOT included in the scope of delivery and serves as an application example.

Carson 2-axle stake trailer. Licensed by Ernst Riedler Fahrzeugbau- und Vertriebsges.mbH New for the 2020 toy fair. Available from stock now! Kit, unpainted. The 2-axle stake trailer from "Riedler Fahrzeugbau" reflects its attractive workmanship and appearance, both in the original and in the model, and makes the trailer an unmistakable companion on real roads, as well as in the model on the course. In combination with the TAMIYA Volvo FH16 timber transporter, this articulated truck becomes a workhorse and is in no way inferior to the original. The solid frame made of sheet steel in combination with the aluminum stakes allow a payload of approx. 5.500g. To ensure that the different lengths of wood fit perfectly on the stakes, they can be moved and positioned freely on the chassis frame. To refine the 2-axle stake trailer, an optional accessory set (item no.: 500907623, with spare wheel and bracket, 2 compressed air tanks and a lashing kit) is available. For use on the TAMIYA Volvo FH16 tractor, the CARSON drawbar with item no.: 7876 is required, which is mounted on the existing frame end cross member. Technical details: Scale 1:14 Torsion-resistant steel frame in sandwich construction Frame made of 3 and 1 mm sheet steel Laser-cut and CNC bent Pivot plate made of sheet steel in sandwich construction Bearing-mounted pivot plate (adjustable) with sliding pad for easy maneuvering Drawbar (one-piece) made of fiber-reinforced plastic with checker plate application For easier attachment, the drawbar is attached via two tension springs held at a coupling height of 75 mm Stake (one-piece) milled from solid aluminum Stake holder can be loosened using two grub screws and repositioned or removed as required. Trailer axles with dummy air springs Ball-bearing chrome rims with wide tires Solid aluminum underrun protection (left/right) Fender splash guard and bumper mud flap set Aluminum rear bumper CNC milled 7-chamber tail lights, license plate holder and work lights included Decoration set Dimensions: LxWxH: 620 x 190 x 305 mm Weight: 2.600g Optionally available: 500907623 Accessory kit for 2-axle Riedler stake trailer *Official Licensed by Ernst Riedler Fahrzeugbau- und Vertriebs.mbH A matching wooden transport box is optionally available for this model as article 12002.

Delivery according to product photo.

Accessories for Riedler stake trailers. Air boiler, spare wheel including holder, chain

1x 2-axle dolly, Carson. With fifth wheel for mounting Tamiya and Carson trailers. With dummy air springs. Supplied as a kit. Kit of a 2-axle dolly. Rigid axle adjustable in length and height. With dummy air springs. Technical data: Length: 365mm Width: approx. 195mm Height: approx. 85mm

Real wood set for planking the Carson low-loader trailer Goldhofer TU4. 14-piece real wood set. The wood is raw and untreated. The individual pieces of wood are mounted on double-sided adhesive tape. The product photo with the mounted version of the article shows an aged version of the wooden planks that have been further processed.

Post for von Carson timber transport trailers, aluminum. For Riedler fans. 5-piece set of stanchions with screws.

Aluminum storage compartment (1:14) with wooden boards for the Goldhofer TU-4 low loader. The wooden planks can be attached to the outside of the low loader on extra-wide vehicles. The wooden planks also fit the extensions item 12375.

Carson 2-axle building material trailer. Maximum payload of 5,5 kg. CNC-milled aluminum side walls. Locking with neodymium magnets. 500907624 The 2-axle building material trailer reflects its attractive workmanship and appearance, both in the original and in the model. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5.500 g. A new suspension is also included, which can be optionally raised by 8 mm and thus compensates for the coupling level of a raised articulated tractor. However, this can also be installed without raising the suspension, both suspension variants are included in the kit. The installed shock absorber and air spring dummies function as on/off spring travel limiters. This enables a higher axle articulation and reproduces a true-to-original driving image. A matching optional accessory kit (500907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing kit.Technical data Trailer length 700mm Trailer width 195mm Trailer height 225mm Trailer weight 4,1 kg Body length 550mm Body width 195mm Body height 130mm Board wall height 75mm Loading height 110mm Coupling height 75mmTechnical highlights Torsion-resistant steel frame in sandwich construction Frame made of 3 and 1 mm sheet steel, laser-cut and CNC bent Sheet steel bogie in sandwich construction Mounted bogie (adjustable) with sliding pad for easy maneuvering Drawbar (one-piece) made of fiber-reinforced plastic with checker plate application Torsion-resistant steel frame in sandwich construction CNC-milled aluminum side walls with detailed surface engravings The side walls are locked using neodymium magnets All 5 side walls are functional 5 hinges on each side boward wall 4 hinges on the rear boward wall Real wood floor application with ball bearings Solid underrun protection Detailed trailer axles with dummy air springs, optionally with a + 8mm lift (kit contains both versions with/without a lift)

Widening set for low loaders. e.g. for Goldhofer TU-4 low loader. Made of plastic. 10 widenings and 10 pins. 1:14 widenings (10 pieces) for low loadersWidenings 1:14, made of plastic, with steel pin for fastening. Dimensions: 19,5mm, height 12,5mm, thickness 4mm, pins 2x16mmContents: 10 widenings and 10 pinsMatching wooden planks for widening the road are available as article 11681.

Short wood trailer kit, Tamiya scale. Suitable for items 12093, 12094. With parking brake that is operated by a servo. (9409T). Short wood trailer (for TAMIYA vehicles)We are now offering a short wood trailer to match the short wood loading crane (PENZ) (item 12093). The trailer has a "tool box" with a flap that can be opened on both sides.An ON/OFF switch or part of the electronics can be housed in this if necessary. The fenders that are optionally available for other trailers are already included in the scope of delivery of the short wood trailer.The short wood trailer is equipped with a parking brake that is operated by a servo (not included).If the brake is applied, the supply voltage to the trailer can be switched off. The parking brake remains applied. This is particularly interesting if the trailer is parked for a longer period of time or on sloping terrain. The cargo and towing vehicles shown are NOT included in the kit!