Filter
1 cab suspension. Conversion Kit for rebuilding as pluggable
1x driver's cab storage. Conversion kit for conversion into a plug-in driver's cab. Suitable for many Tamiya driver's cabs, except for Arocs3363, Arocs3348, FH16 timber transporter and FH16 tow truck. Since the Volvo FH16 (tow truck and timber transporter), Scania 770S and 770S 8x4/4 SLT models already have plug-in driver's cabs ex works, the use of this driver's cab storage is not sensible/necessary. With this conversion kit, many Tamiya driver's cabs can be converted into a plug-in driver's cab. This has the advantage that you can simply put the driver's cab to one side when working on the vehicle. The unsightly tipping limiter is completely eliminated. If a bull bar is installed, the driver's cab can no longer be tilted for this reason alone. All parts required for the conversion are included! The driver's cab is reliably connected to the chassis using 4 rubber bearings - the rear driver's cab attachment remains unchanged (kit original).

Available immediately, delivery time: 1-4 days

Product number: 7425

€ 24,99 *
%
1x electric trailer supports Tamiya. Complete
1x electric trailer supports Tamiya. Complete set (kit) for electrically powered trailer supports suitable for all Tamiya trailers. 300056505. The extension and retraction is operated together with the servo-operated fifth wheel coupling (included in the kit - but not the servo (this must be purchased separately)). The coupling and uncoupling operation is therefore controlled from the tractor unit. The supports can also be manually extended and retracted using the emergency switch that is operated by hand.Fifth wheel plates with the option of servo operation are available as items 11198 (plastic) and 9218 (aluminum).The limit switches are available as spare parts as item 12138.

Available immediately, delivery time: 1-4 days

Product number: 7736

€ 84,20 * € 115,00 * (26.78% saved)
%
1x Semi-light kit Tamiya. For 7-chamber
1x Tamiya trailer lighting set. For 7-chamber tail lights. 2 ready-to-use lighting boards with connection cable, trailer cable, adapter cable for MFC-xx. Consists of two assembled and ready-to-use boards (each with 5 SMD LEDs) that are simply clicked into the 7-chamber tail lights of the CARSON trailer. The adapter cable between the CARSON trailer lighting and the TAMIYA MFC-01/MFC-03 is included in the scope of delivery, and the tail lights can also be combined with the marker light unit. Scope of delivery: 2 circuit boards for 7-chamber tail lights, MFC-01/MFC-03 adapter cable, trailer cable, instructions. Length of adapter cable approx. 30cm. Length of connection cable approx. 145cm. Suitable for the tail light units article 1905 and all tail lights of the European CARSON trailers with 7-chamber optics.

Available immediately, delivery time: 1-4 days

Product number: 7786

€ 62,99 * € 72,99 * (13.7% saved)
1x lens head screw M3x60mm (ME20). 19808292. Screw
1x Linsenkopfschraube M3x60mm (ME20). 19808292. Screw ME20 loud Plan.

Available immediately, delivery time: 1-4 days

Product number: 10210

€ 3,28 *
%
1x Semi-light kit Tamiya. Wiring harness
1x Semi-light kit Tamiya. Harness with soldered LEDs for the rear lights of the Tamiya trailer. Plug-in connection to the tractor, small parts.

Available immediately, delivery time: 1-4 days

Product number: 7735

€ 48,99 * € 56,49 * (13.28% saved)
1 underfloor engine compact holder for all
1 underfloor motor compact holder, suitable for all Tamiya tractors. Aluminium sheet 1,5mm. Designed for the GM32Uxxx gear motors from Servonaut. Data:Length 147mmWidth 59mmHeight 40mmThe holder can accommodate a loudspeaker (e.g. item 7028), a gear motor and a servo. In addition, holes are already provided for cables to control the fifth wheel plate or for lockable axles.The holder is screwed onto the frame longitudinal members with screws (not included).

Available immediately, delivery time: 1-4 days

Product number: 7424

€ 19,50 *
%
1 gear set for trailer supports (56505). 1 snail 3 Z
1 gear set for trailer supports (56505). 1 worm, 3 gears. Tamiya. Unpainted. 309415073 Contents:1x worm (worm pinion), white1x gear red 36/10 teeth1x gear green 40 teeth1x gear grey 26/12 teethAll parts made of plastic.

Available immediately, delivery time: 1-4 days

Product number: 8488

€ 5,19 * € 5,99 * (13.36% saved)
%
Spring cotter 6mm. 1x original spare part Tamiya
1 split pin 6mm. Genuine Tamiya replacement part.

Available immediately, delivery time: 1-4 days

Product number: 9565

€ 0,45 * € 2,99 * (84.95% saved)
Socket wrench SW3 made of steel. Key to the lighter
Socket wrench SW3 made of steel. Wrench for easier assembly of the aluminum rims (decorative/driver screws). Outside diameter at the front end: 4,7mm

Available immediately, delivery time: 1-4 days

Product number: 10912

€ 8,98 *
%
ALU tank mount kit for European 2 / 3 axle tractor
ALUMINUM tank mount set for Tamiya tractors. Specially designed for the European 2/3-axle tractors from Tamiya. When using the 2-speed transfer case, the battery holder on the TAMIYA 2/3-axle Euro tractors must be removed, as the tanks and exhaust system are also mounted on this. All the parts and mounts required to mount these attachments on the frame are included in the set. Scope of delivery: one aluminum mount each (left and right side of the frame), mounting material.

Available immediately, delivery time: 1-4 days

Product number: 10905

€ 17,99 * € 18,99 * (5.27% saved)
Futomtec ball valve
ball catch

Available immediately, delivery time: 1-4 days

Product number: 11188

€ 2,69 *
%
ALU base plate / battery holder for 2 / 3-axle Euro tractors
ALU base plate/battery holder for 2/3-axle Euro tractors from Tamiya except for the Mercedes-Benz Arocs. Suitable for all 2/3-axle Euro tractors from Tamiya, except for the Mercedes-Benz Arocs! Replaces the battery holder included in the kit and moves it to the driver's cab. The driver's cab can still be tilted even after the conversion. The item 500907584 tank bracket set is also required to mount the tanks.

Available immediately, delivery time: 1-4 days

Product number: 10908

€ 61,99 * € 69,99 * (11.43% saved)
Wheel nuts with collar. 8x stop nut M4 with collar. (Stole)
Wheel nuts with collar. Lock nut M4 with collar. (Steel). Suitable for all axles with M4 thread. Bag with 8 pieces.

Available immediately, delivery time: 1-4 days

Product number: 12439

€ 2,99 *
%
Frame cover for 3-axle Tamiya tractors. From 0,8mm
Frame cover for 3-axle Tamiya tractors. Made of 0,8mm VA teardrop. All edges are pre-bent. 500907255. Frame cover for Tamiya Euro-Trucks MAN and SCANIA.

Available immediately, delivery time: 1-4 days

Product number: 11200

€ 89,99 * € 92,99 * (3.23% saved)
Replacement engine for trailer supports Tamiya 56505
1 engine for trailer supports (Tamiya). 1x replacement engine for article 7736.

Available immediately, delivery time: 1-4 days

Product number: 9927

€ 8,09 *
%
ALU servo mount for 2 / 3 axle tractors from Tamiya
ALU servo mount for 2/3-axle tractors from Tamiya. NOT for the Arocs from Tamiya! Is required when using the Carson 2-speed gearbox 500907265 and the aluminum base plate/battery holder 500907593. Suitable for all 2/3-axle Euro tractors from Tamiya except the Mercedes-Benz Arocs!

Available immediately, delivery time: 1-4 days

Product number: 10907

€ 27,99 * € 30,99 * (9.68% saved)
%
CARSON bracket attachment parts for Tamiya tippers
Bracket attachments tipper. This is required when using the Arocs base plate to attach the chassis attachments. Consisting of 2 aluminum brackets (per 1 set left / right)

Available immediately, delivery time: 1-4 days

Product number: 11222

€ 16,99 * € 17,29 * (1.74% saved)
%
Nut M2 (spare part BB6) 10 pieces
Nut M2 (spare part BB6). Package content: 10 pieces.

Available immediately, delivery time: 1-4 days

Product number: 9517

€ 2,89 * € 2,99 * (3.34% saved)
Screw ME1 (spare part). 4 pieces M3x8mm
4x screw ME1 (spare part). M3x8mm. Phillips countersunk screws. 4 pieces in pack.

Available immediately, delivery time: 1-4 days

Product number: 9516

€ 3,09 *
%
Incredibly true to the original driver's cab lock made of V2A
Incredibly authentic stainless steel cab lock. A holder is attached to each side of the chassis. The counterpart is attached to the cab. For Scania cabs from Tamiya (not for S770). Secure locking thanks to a hook system in the lock. A drilling template is included in the delivery.

Available immediately, delivery time: 1-4 days

Product number: 12478

€ 114,99 * € 115,00 * (0.01% saved)
%
Nooxion axle suspension for Tamiya cabs
Swinging axle suspension for Tamiya driver's cabs. This simulates the dive when braking and the lifting of the front axle when accelerating. The Nooxion axle suspension enables scaling movement for RC trucks from Tamiya. The system does not require any signals from the steering or gas channel and works completely independently thanks to a gyroscope. The parts are manufactured to extremely high quality and some are painted. Adjustment options Each individual servo output can be switched (reverse) via the central unit. The sensitivity can be adjusted; the smaller the set value, the later the cabin reacts to impacts. The damping can also be regulated. A small value means the cabin will oscillate for longer; with a higher damping value, the oscillation stops sooner. The hardness can also be adjusted using the mini potentiometer. The smaller the set value, the lower the frequency of the oscillation. Contains: Electronic unit including gyroscope Base plate 2x servos

Available immediately, delivery time: 1-4 days

Product number: 12615

€ 269,00 * € 299,00 * (10.03% saved)
Cabin suspension system for Tamiya cabs
Model variant: Volvo FH-16
Cab suspension system for VOLVO cabs from Tamiya. The possibility of recreating the original suspension of the cab. Select your model type! The cabin suspension system from Nooxion enables scalable movement for RC trucks from Tamiya. The system does not require signals from the steering or gas channel and works completely independently thanks to a gyroscope. The parts are manufactured to an extremely high quality and some are painted. Due to the different Tamiya vehicle types, it is necessary to select your vehicle type. The system is offered for the following models. Tamiya Arocs 3363 Tamiya Arocs 3348 Tamiya Actros 1851 Tamiya Actros 3363 Tamiya MAN 18.540 Tamiya MAN 26.540 Tamiya Scania R470 Tamiya Scania R620 Tamiya Volvo FH-16 Tamiya Scania 770 S The system can be expanded by two additional servos on your own. An extension function may be added in the future. The movements appear absolutely realistic and are in no way inferior to the original.Adjustment optionsEach individual servo output can be switched via the central unit (reverse).The sensitivity can be adjusted; the smaller the set value, the later the cabin reacts to impacts.The damping can also be regulated. A small value means the cabin oscillates for longer; with a higher damping value, the oscillation stops sooner.The hardness can also be adjusted using the mini potentiometer. The smaller the set value, the lower the frequency of the oscillation.Contains:Electronic unit including gyroscopeVehicle-specific base plate2x servosVehicle-specific partsPlease note! The parts differ depending on the model selected. A patchbabel for the power supply is no longer included.

Available immediately, delivery time: 1-4 days

Product number: 11779

€ 299,00 *