Topseller
No results were found for the filtering!
1 aluminum swing axle f. Robbe trucks ....
Guide. This axle, milled from solid aluminium, prevents the forklift from ever knocking knees again, even when it is in constant use or standing still for a long time. The original parts of the...
67,00 € *
1 pair of headlights boards 7,2V for Scania ...
1 pair of headlights boards 7,2V for Scania from Tamiya. Ready to connect LED boards (left / right) stands with series resistor and color-coded pigtails 5 light functions. (500907565). Spotlight lighting boards (1x left / 1x ...
63,99 € * 70,98 € *
TIP!
Tamiya Mercedes Benz Actros 3363 Gigaspace 6x4, ...
1 Tamiya Mercedes Benz Actros 3363 GigaSpace 6x4. Kit. Unpainted. 300056348. Complete kit for building a driving model. For complete completion as a driving model you also need: paint (s), driving battery, RC components ...
439,00 € * 529,99 € *
Battery pack with 10x SANYO cells, 12V F5x2 10 ...
Battery pack with 10x SANYO cells, 12V F5x2 10 cells, 2700mAh NiMH with AMP socket, approx. 12cm silicone cable. SANYO HR-3U. approx. 315gr. 72x53x29mm over everything.
44,74 € *
Fork adjustment electrical, 1 piece ....
The original forks are used; these are not included in the scope of delivery. The fork carrier (milled aluminium) is exchanged for the original carrier (made of plastic). This requires partial dismantling of the wishbone. To the...
128,90 € *
1x battery pack with 10x SANYO cells F5x2, 10 ...
1x battery pack with 10x SANYO cells, F5x2, 10 cells, 12V, 2000mAh NiMH ENELOOP open end. Approx. 12cm silicone cable. SANYO HR-3U, approx. 270gr. 72x53x29mm over everything.
42,98 € *
1x towing trough in Tamiya scale. Built from...
1x towing trough in Tamiya scale. Made of PS plates of different thicknesses. Structural completion, vorgespachtelt and sanded. Before painting, are still a little reworking necessary! Overall length: 462 mm length of navigable platform ...
169,00 € *
Carpet Dorn (1 pieces) Brass, matching the
Carpet Dorn (1 piece) brass to match the original forks of Robbe-stacker about 100 mm mandrel length, diameter 5mm Dimension of Shoes 10x3,7mm. By pushing it over the existing forks and fixed with a screw. Ca ....
27,00 € *
1 filing for carpet thorn brass. The...
1 filing for carpet thorn brass. The tray is screwed to the floor and takes the carpet Dorn (Article 4231) on. The filing allows the safe pick and place the carpet mandrel.
6,25 € *
1x transport hooks from MS / aluminum, matching the ...
1x transport hooks from MS / aluminum to match the original forks of Robbe-stacker to 127 mm Lastarmlänge, in 4 positions lockable (extendable). Unpainted.
29,00 € *
1 load hook, brass, suitable for the ...
1 load hook, Brass, matching the original forks of robbe stacker recording with 2 forks. With finely detailed brass hooks. With clamping screw for locking. Unpainted pitch of the fork pockets: 40mm internal dimensions of ...
16,99 € *
Fork shoes (1 pair) brass to match the
Fork shoes (1 pair) brass to match the original forks of Robbe-stacker about 110 mm total length, 10 mm wide. New version!
22,50 € *
1 guard, unpainted, brass. Suitable for
1 guard, unpainted, brass. Suitable for fork positioners or fork-Seitenschieber.Gitterhöhe ca.50mm. The grid is only pushed onto the fork plate. Weight approx 30gr. Overall width approx 111mm level of protection bars ca ....
26,00 € *
Set of 2 cardan shafts for loaders 966G 1x ...
Set of 2 cardan shafts for loaders 966G 1x Kardan10 41mm long 2x4H7 bore 1x Kardan10 max.119mm with stainless steel protection tube 2x4H7 bore. Blank steel.
95,00 € *
last seen