1x EasyBus lighting system TAMIYA Mercedes 1838 and 1850L.

1x EasyBus lighting system TAMIYA Mercedes 1838 and 1850L. Variant KLM 4 / 0. The plug & play solution.

Ready to install lighting boards, compatible with all sound modules, speed controllers and the Tamiya MFU. The EasyBus lighting systems are available with different lighting boards, IR Semi lighting etc. expandable.
The PC software is downloadable for free. It no programming skills are required. The controller is adapted to the smallest detail.

Delivery:
-2x front panel for Mercedes 1838 and 1850L
-2x tailboard for Mercedes 1838 and 1850L
-1x KLM 4 / 0 beam assistant

Technical data:
Power supply via receiver power supply
(BEC of the cruise controller)
Max. Power consumption: 20mA per device and 20 mA per LED

LEDs front (per side):
1 x 3mm yellow
1 x 3mm white
2 x 5mm bright white
Ultra bright high power LEDs
Additional outputs in front: 3 with 180Ohm resistor each

LEDs rear (per side):
each 3x SMD 1206 red
1x SMD 1206 yellow
1x SMD 1206 white
Ultra bright high power LEDs
Additional outputs rear: each 1 with 180Ohm resistor

The lighting system for the TAMIYA Mercedes MB 1838 / 1850L of the next generation: ultra-compact, expandable (eg with infrared), easy operation and compatible with the most common systems!

The light set is available with the light assistant KLM-4 / 0. All lighting functions (except the front, upper and side indicators) are equipped by the four lighting boards (2x front, 2x rear).
In order to be able to provide the side turn signals and the side lights with light, we offer the version "LEDs", in each of which two of the three additional outputs of the front boards are equipped with plug connections and the corresponding LEDs.
The light assistant is compatible with ordinary forward / reverse cruise controls (with or without a separate brake), with the Servonaut cruise control controls and the Tamiya MFU / MFC.

The light functions can be controlled in a variety of ways, for details, please refer to the manual.

This starter set includes a complete lighting system for the Mercedes 1838 or 1850L from TAMIYA and consists of four lighting boards (2x front, 2x rear) and the lighting assistant (central module) KLM 4 / 0.

The lighting boards are connected either directly to the lighting assistant or via the distributor board to the KLM 4 / 0 and can also be configured via this. Brightness, flashing speeds, but also the basic functionality (eg: should be switched on the output, the high beam) can be set separately for each output. Information on this can be found in the manual.