Beier mini sound module MSM-1. Completely pre-configured

1x Beier mini sound module MSM-1. Completely preconfigured sound and light module for RC models and therefore a simple plug & play sound module that is very suitable for beginners.

The MSM-1 at a glance

Control sound + light in one unit
steering

• Suitable for many types of models
• 14 different model types with all sound and light settings
• Plug & Play - ideal for beginners
• No computer required for model selection or other settings
• Supply voltage between 5 - 14 V DC
• 6 proportional inputs for controlling sound and light functions with a standard remote control

Model types

• 3 x trucks
• 2 x cars
• 1 x emergency vehicle
• 1 x Tractor
• 2 x construction vehicles
• 2 x tanks
• 3 x ships

Sound

• Driving sounds for 14 different model types
• Various additional sounds depending on the model type: e.g. horn, fanfare, ship's horn, cannon shot, machine gun fire, radio message, hydraulic noise, animal noises, siren, announcements
• Optimum sound thanks to the integrated, powerful amplifier

Light

• 8 outputs for connecting LEDs, lamps, relays, etc.
• Different outputs depending on the model type: e.g. light, turn signal, brake light, reversing light, cannon flash, machine gun flash, warning light, speed camera
• Connection for an IR light module for forwarding the light and servo signals to semi-trailers and trailers

Accessories (not included)

• Speaker with housing
• Connection terminals for easy connection of LEDs
• Battery Y cable for parallel connection of the sound module and speed controller to the battery
• Volume potentiometer for manual volume adjustment

Descriptionbr>The MSM-1 is a completely preconfigured sound and light module for RC models and therefore a "simple" plug & play sound module that is very suitable for beginners.
There are 14 different model types with all sound and light settings permanently stored in the memory. You can choose from:

• 3 trucks
• 2 cars
• 1 emergency vehicle
• 1 tractor
• 2 construction vehicles
• 2 tanks
• 3 ships

The desired model can be easily selected using a standard RC transmitter. No software, computer or other programming hardware is required to select the model.
The MSM-1 has 6 proportional inputs that can evaluate 6 channels of an RC receiver. The 1st channel is always the gas channel, the 2nd channel is the steering on most models. Additional sounds and lights can be controlled via the remaining 4 channels. The sound and light functions differ depending on the model type.
To achieve various lighting effects, the MSM-1 has 8 switching outputs to which, for example, LEDs, lamps and relays can be connected. Lighting functions such as low beam, reversing lights, brake lights, turn signals, hazard lights, etc. can be controlled easily and in accordance with sound and movement.
Each of the 14 preconfigured models has its own driving sound (engine sound) and additional sounds that match the model type and can be triggered via the RC transmitter.
Attention: The sounds and settings of the 14 models cannot be changed on the MSM-1!
If you want to be able to change or adjust sounds or other settings yourself, we recommend the USM-RC-3 sound module.
The MSM-1 can also be viewed as a "simple" plug & play sound module and is very suitable for beginners.

Technical data

• Supply voltage (Ub): 5 to 14 V DC
• Current consumption: Quiescent current: approx. 60 mA
  Operation: dependent on volume and load
• Proportional inputs: 6 pieces PWM (1,000 - 2,000 ms)
• Switching outputs: 8 pieces
• negative switching - open collector: max. 1,5 A per output,
  Total current of all outputs must not exceed 3,0 A
• AF amplifier: 20 W
• Recommended speakers: 4 - 8 ohms
• Volume adjustment: By external potentiometer (100 kOhm) and/or remote control
• Memory for the sound data: Internal flash 64 MB
• Sound output: 16 bit, mono, 22 kHz
• Model types: 14 models
  3 x trucks
  2 x car
  1 x emergency vehicle
  1 x Tractor
  2 x construction vehicle
  2 x tanks
  3 x ship
• Available sounds:
  Driving sounds (starting noise, shutdown noise, starting noise, stopping noise, stationary noise, braking noise, reversing warning, cornering squeak, indicator noise)
  Various additional sounds depending on the model (horn, compressed air fan, ship's horn, depth sounder, turret turning, machine gun, cannon shot, radio message, animal noises, hydraulic noise, siren, announcements)
• Further interfaces: Interface for data cable K-USB-2 (currently not working!) or IR transmitter diode for light modules LM-IR-8-1 and LM-IR-16-4
• Protective functions: Current monitoring of the switching outputs
• Permissible ambient temperature: 0 to 60°C
• Permissible relative humidity: Max. 85%
• Dimensions: 51 33 x x 17 mm
• Weight: 18 g

What's in the box

• Mini sound module MSM-1
• Operating instructions (German and English)
• 6 pieces of servo patch cables (30 cm) for connecting to an RC receiver
• 1 piece of connection cable (25 cm) for speakers
• 1 piece of ribbon cable (40 cm) for connecting the switching outputs
• Fuse holder with 4 A fuse