Kingbus lighting set Univeral.XENON. Complete set Univers

Kingbus lighting set Univeral.XENON. Complete set universal. Kingbus system. Complete set of central module, lighting boards, various cables and distributors and accessories.

Universal modules for lighting a complete model.
Individual LEDs can be connected to each module. No additional series resistors are required for this, as these are already integrated in the module.
The color of the LEDs to be connected is marked with a colored dot on the module. One LED can be connected to each output.
Several LEDs (up to 100 mA in total) can be connected to the outputs marked with "HC". However, the series resistor must be calculated and installed between the universal module and LED (only with HC output!).
The light modules are delivered ready assembled and tested. They just have to be installed in the model. There are no adjustments to the housing necessary!

These modules are available in 2 versions: with Xenox effect (flash on power up) or as halogen headlamps (without flash).
The modules are delivered ready assembled and tested.
The lights can be controlled via the kingpad (not included).

Features Outputs Front modules:

Sidelights

Low beam (only with parking light)

High beam (latching only with low beam)

Lichthup to

Fog Lights

Turn signal left / right

hazard lights

Autom. Cornering lights when steering or flashing

Xenon effect!

+ 5V connection

Outputs rear modules:

Sidelights

Rear fog light

Brake light over the driving channel

Reversing lights via driving channel or kingpad

Turn signal left / right

hazard lights

+ 5V connection

Technical data:
Dimensions per module: 27x15x8mm
Cable length per module: 150mm

Delivery:

1 Kingbus central module Dimensions: 34x23,5x8mm

3 patch cable for connecting the central module to the receiver

1 Kingbus patch cable 50cm

1 Kingbus 4 manifold

2 universal modules for front (left / right)

2 universal modules for rear (left / right)