EasyBus lighting system KLM 4/16 for Tamiya Arocs 3348/4151

EasyBus lighting system KLM 4/16 for Tamiya Mercedes-Benz Arocs 3348/4151.

The lighting system for the TAMIYA Arocs 3348/4151 with the new KLM 4/16, ready-to-install lighting boards and integrated infrared transmitter.
The lighting boards are simply inserted from the back into the light chambers and hold by press fitting.
The system is controlled by a KLM 4 / 16, which is compatible with ordinary forward / reverse cruise controls (with or without a separate brake), cruise control and all sound modules.

The light functions can be controlled either with our control pad or in many other ways, details can be found in the online manual.
This starter set includes a complete lighting system for the Mercedes-Benz Arocs 3348/4151 from TAMIYA and consists of two front lighting boards with wired LEDs for the side indicators, underrun protection and marker lights, as well as a light assistant KLM 4/16.br>The lighting boards are installed directly connected to the KLM 4/16 and can also be configured with our Kraftwerk ControlPanel. Brightness, flashing speeds, but also the basic functionality (e.g.: should the high beam be switched on the output) can be set separately for each output. You can find information about this

Highlights & Details

• KLM 4 / 16 (4 servo inputs, 16 switching outputs, 5 bus outputs)
• Ready to install lighting boards
• Plug & Play solution (connect and drive)
• Compatible with all sound modules
• Compatible with all travel controllers
• Compatible with Tamiya MFU
• Expandable with different lighting boards
• Extendable with infrared for trailer lighting
• Adaptable to the prototype to the smallest detail via PC
• No programming skills required
• downzuloaden software free - PC
  
  Technical data
  
  Power supply:
• via receiver power supply (BEC of the travel controller)
• Max. Power consumption 20mA per device and 20 mA per LED
  
  LEDs front (per side):
• yellow: 1x 3mm
• white: 2x 3mm, 1x 5mm
• yellow wired: 2x 3mm
• white wired: 1x 3mm
• Ultra bright high power LEDs
• Additional outputs front 3 with each 180Ohm resistor
• LEDs rear (per side):
• red: 1x 3mm, 1x 5mm
• yellow: 1x 5mm
• white: 1x 3mm
• Ultra bright high power LEDs
• Additional rear outputs per 2 with 180Ohm resistor
  
  What's in the box
  
  
• Lighting assistant KLM 4 / 16
• four ready-to-install lighting boards (2x front, 2x rear)