EasyBus lighting system KLM 4/16 for Tamiya Volvo FH16 (NEW)

EasyBus lighting system KLM 4/16 for Tamiya Volvo FH16 timber transporter and TowTruck. incl. Roof bar lighting. New generation.

The lighting system for the TAMIYA Volvo FH16 timber transporter with the new KLM 4 / 16, ready-to-install lighting boards and integrated infrared transmitter.
Also suitable for the Tamiya Volvo TowTruck.
The lighting boards are simply inserted from the back into the light chambers and hold by press fitting.
The system is controlled by a KLM 4 / 16, which is compatible with ordinary forward / reverse cruise controls (with or without a separate brake), cruise control and all sound modules.

The light functions can be controlled either with our control pad or in many other ways, details can be found in the online manual.
This starter set includes a complete lighting system for the Volvo FH16 by TAMIYA and consists of two front and rear lighting boards with wired LEDs for the side indicators, underride protection and marker lights, as well as a light assistant KLM 4 / 16.br> The lighting boards are connected directly to the KLM 4 / 16 are connected and can be configured via this also with our power plant ControlPanel. Brightness, flashing speeds, but also the basic functionality (eg: should be switched on the output of the high beam) can be set separately for each output. For more information, see article 10822.

Highlights & Details

• KLM 4 / 16 (4 servo inputs, 16 switching outputs, 5 bus outputs)
• Ready to install lighting boards
• Plug & Play solution (connect and drive)
• Compatible with all sound modules
• Compatible with all travel controllers
• Compatible with Tamiya MFU
• Expandable with different lighting boards
• Extendable with infrared for trailer lighting
• Adaptable to the prototype to the smallest detail via PC
• No programming skills required
• downzuloaden software free - PC

Technical data

Power supply:

• via receiver power supply (BEC of the travel controller)
• Max. Power consumption 20mA per device and 20 mA per LED

LEDs front (per side):

• yellow: 1x 3mm
• white: 2x 3mm, 1x 5mm
• yellow wired: 2x 3mm
• white wired: 1x 3mm
• Ultra bright high power LEDs
• LEDs rear (per side):
• red: 1x 3mm, 1x 5mm
• yellow: 1x 5mm
• white: 1x 3mm
• Ultra bright high power LEDs
• Additional rear outputs per 2 with 180Ohm resistor

What's in the box

• Lighting assistant KLM 4 / 16
• four ready-to-install lighting boards (2x front, 2x rear)
• Infrared transmitter diode
• wired LEDs for side indicators
• wired LEDs for underrun protection
• wired LEDs for clearance lights
• KLB-8 for rooflight lighting.