Switching module RC-SM-2

1x switching module RC-SM-2. 2 potential-free outputs, connection directly to the receiver. Switching current up to 0,4A. DISCONTINUED ITEM!

The RC circuit module RC-SM-2 has 2 outputs which can be switched via a proportional channel of a remote control RC.

The RC-SM-2 is connected via a power cable directly to an output of the receiver of the remote control. It is also possible the switching module in parallel (eg, with a Y-cable) to connect to an existing servo or speed controller.
The two outputs including various additional sounds can be triggered on our sound modules. Many other applications are possible in which consumers are to be switched (eg lamps, LEDs, small motors, relays, etc.).
By using PhotoMOS relays, the outputs are floating and can by appropriate wiring must be run as plus- or minus-switching.

The standard was originally developed for switching additional sounds and is therefore designed only for relatively small currents (max. 0,4 A).
However, there is also a version with the designation RC-SM-2H available, which each output a current of max. 4 A can switch.

With 2 jumpers can choose between 4 switching variants:
- tactile function
- Switching function (memory switch)
- Turn on change of the proportional signal (directional)
- Turn on change of the proportional signal (by motion)

About a trimmer, the switching thresholds, or the sensitivity can be adjusted with the change in the proportional signal.

The module is supplied with an approx 30 cm long power cable with Graupner plug.
The connections for the two outputs are designed as solder connections.

Technical data:
Required RC proportional channel: 1
Supply voltage: 4,8 - 6,0V (via RC receiver)
Current consumption: approx 10mA
Switching outputs: 2 piece
floating, positive or negative switching
Switching voltage: max. 40V DC
Switching current (per output):
Max. 0,4A in RC SM-2
Max. 4,0A in RC SM 2H

Switching variants:
- tactile function
- Switching function (memory switch)
- Turn on change of the proportional signal (directional)
- Turn on change of the proportional signal (by motion)
Threshold: Adjustable between 1,0-1,5 and 1,5-2,0 ms
Dimensions: 39 25 x x 13mm
Weight: 11g

Article is no longer available. Successor article: 11991.